Customer has a broken water line coming into his home at the main and underneath the home, upon diagnosis I noticed a break in the sewer line as well. Crawled underneath the home and ran copper under the home and went to pex to accommodate the small holes in which I would have to solder. Connected the 3/4 main to the main water line underneath the home and added a tee and ran 1/2 inch pex to underneath the sink. Repaired the abs 90s and noticed there was another break at a coupling further down the line, cut that out and installed a band and re-strapped the pipe. Installed a double angle stop for a kitchen faucet and a future ice maker line that the customer wanted. Connected the pipe underneath the home to the main, and turned the water on. No visible leaks and water pressure was good according to the customer, crawled back under the home after leaving the faucet on. No water line leaks underneath the hoe and the ABS was flowing without leaks as well. One year parts and labor on all t