Once again, the team at CVJ provided us with quality service and professional execution by the technicians, restoring our peace of mind.
Response from CVJ Heating and Air Conditioning LLC:
Thank you Rhonda for allowing us to take care of your heating and cooling needs for all these years!
The tech was knowledgeable and friendly.
Response from CVJ Heating and Air Conditioning LLC:
We appreciate you sharing your 5-star review with us and the community!
Response from CVJ Heating and Air Conditioning LLC:
Thank you so much for your 5-star review! We will share this with the team to let them know to keep up the amazing work.
CVJ has always provided great customer service. They are knowledgeable and always friendly. The only A/C company I call.
Response from CVJ Heating and Air Conditioning LLC:
Thank you so much for taking the time to leave us a 5-star review!
Angie quickly got back with me to get someone out to look at my system. When I told her I have no heat Steven was able to come out that day. I needed a new system and pricing was fair. The entire staff was professional and friendly from the phone call to installation and clean up. Highly recommended!!
Response from CVJ Heating and Air Conditioning LLC:
We’re so happy you loved your experience and can’t wait to have you back for your next service appointment.
Response from CVJ Heating and Air Conditioning LLC:
Thank you so much for your 5-star review! We will share this with the team to let them know to keep up the amazing work.
I refer CVJ to everyone.
Response from CVJ Heating and Air Conditioning LLC:
We are so grateful for your 5-star review. Thanks for sharing your rating with us and the community.
Response from CVJ Heating and Air Conditioning LLC:
Thank you so much for this 5-star review.
I'm happy that I have been used them for years. Needless to say I will call them again.
Response from CVJ Heating and Air Conditioning LLC:
We are so grateful for your 5-star review. Thanks for sharing your rating with us and the community.
A great Company 👍
Response from CVJ Heating and Air Conditioning LLC:
We’re so happy you loved your experience and can’t wait to have you back for your next service appointment.
I arrived at a home in Brookside for a thermostat repair job. Customer complained that their thermostat was not working. The homeowner reported the heating system wasn’t responding. After testing the thermostat, I discovered the real issue was a faulty furnace ignitor. I replaced the ignitor, tested the system, and restored proper heating. The customer was relieved to have quick, accurate service.
Arrived at a home in Oakwood for an air duct repair job. The homeowner complained of high energy bills and poor airflow. I located and sealed leaks, replaced damaged duct sections, and cleared debris. After testing, airflow improved significantly. The customer noticed better HVAC performance. Contact us for expert air duct repair services!
I arrived in Southridge for an air duct repair job. The homeowner reported weak airflow and uneven cooling. I sealed leaks, reinforced connections, replaced damaged ducts, and removed debris. After testing airflow, the system ran efficiently. The customer noticed immediate improvements. Contact us for expert air duct repair services!
Performed annual maintenance on a Bryant Evolution furnace. Cleaned the burner assembly, inspected the heat exchanger for cracks, and tested the flame sensor. Checked and tightened all electrical connections and measured static pressure in the ductwork.
Repaired a Daikin DZ18TC heat pump that was tripping the breaker. The compressor's start capacitor had failed. Installed a new dual-run capacitor and checked the compressor amperage using a clamp meter. Verified that the unit operated without further trips.
Serviced a malfunctioning electric heater that wasn’t cycling properly. Found a defective limit switch using a continuity tester. Replaced the switch and inspected the heating elements for wear. Tested the heater to confirm proper cycling and heating performance.
Troubleshot a malfunctioning auxiliary heat system on a Rheem RP17 heat pump. The issue was due to a burned-out heat strip relay. Replaced the relay and tested the system in emergency heat mode, confirming proper auxiliary heat operation.
Performed routine maintenance on a Trane XR15 heat pump. Cleaned the condenser coils using a coil cleaner, checked the electrical connections, and tested the capacitor. Verified proper airflow and ensured the refrigerant charge was within acceptable limits.
I repaired a Lennox XP16 heat pump that was not blowing warm air. After inspecting the system, I found a faulty reversing valve. Replaced the valve and recharged the refrigerant to the correct level using an R-410A manifold gauge set.
I performed HVAC repair on a York system in Denton. The issue was a faulty capacitor that caused the AC to stop running. I replaced the capacitor, cleaned the condenser coils, and checked the refrigerant levels. The system is now operating smoothly and cooling effectively.
Today, I completed heating maintenance on a Carrier furnace in Denton. I inspected the heat exchanger, cleaned the burners, and replaced the air filter. I also tested the gas pressure and verified the thermostat calibration. The furnace is now ready for the colder months ahead.
I performed heating maintenance on a Lennox Elite EL296 gas furnace in Denton, TX last evening, ensuring it was ready for winter. I started by inspecting the heat exchanger for cracks and cleaning the burners to ensure proper combustion. I replaced the air filter with a 20x25x1 high-efficiency filter and lubricated the blower motor. The flame sensor was polished, and the gas valve was calibrated for optimal operation. Finally, I tested the safety switches and thermostat for functionality. The system passed all diagnostic tests and was running efficiently, providing reliable heating for the customer.
In Denton, TX, I completed routine maintenance on a Carrier Infinity 96 gas furnace. I inspected the heat exchanger for cracks, cleaned the burners, replaced the 16x25x1 air filter, and calibrated the thermostat for accurate temperature readings. The safety controls were tested, and the system was confirmed to be ready for the colder months ahead.
Repaired Lennox EL296V two-stage furnace with no heat complaint in Denton. Diagnosed failed pressure switch using digital manometer. Replaced switch with OEM part 103935-03. Cleaned flame sensor with fine-grit sandpaper. Verified inducer motor operation. Checked all limit switches. Adjusted blower speed for proper temperature rise. Cycled system through both stages to ensure proper operation. Restored heat to residence.
Performed fall maintenance on Daikin FIT heat pump system with gas furnace backup in Denton. Cleaned outdoor coil using coil cleaner and low-pressure rinse. Checked refrigerant charge, topped off R-410A. Cleaned condensate drain line with compressed air. Replaced air filter with MERV 11 pleated filter. Inspected ductwork and sealed accessible leaks with mastic. Cleaned flame sensor and checked ignition sequence on furnace. Calibrated Daikin One+ thermostat. Installed Daikin premium air purifier. Conducted static pressure test and adjusted blower speed for optimal airflow. Left system in peak condition for heating season.