Have any feedback for us? We'd love to hear it! Call us at (610) 595-9072 and let us know how we are doing.
Installed new amana coil on top of an amana gas furnace. It now sits in a pan with a wet switch tied into the unit. The line set was re connected and the unit sits back further so we can redo the supply and return trunks. The supply comes off a box with 14 inch flex onto a new supply plennum on the coil. The return goes into the floor where the bay was used as a return and also uses 14 inch flex with 2 more 8 inch flex return runs as well. We ran a new condensate drain with an ez trap which is wired to the unit to the floor where the exiting drain came up from the wall chase. The flue pipe was tied back in and the system was pressure tested and evacuated for leaks. Ran in heat and the system is running to factory standards. We will need to come back to test the AC and probably add some refrigerant to the system as Heavy rain and cold weather was interfering. Tried to call homeowner and he didn’t answer. Office will have to collect final payment.