Gas Steam Boiler Perform a tune-up and cleaning to help ensure reliable and safe operation. Inspect for cracks & deterioration of Heat Exchanger. Check and clean Burners, vacuumed-ok Check and cleaned flame sensor & Pilot Assembly-ok Check Safety Controls-ok Check electrical wiring and components-ok Check Gas valve & Gas Line-ok Check Combustion Air & Flue Pipe-ok Check GVD- Flue Damper-ok Check LWCO-ok Check and cleaned pressuretrol pigtail-ok Check and make leak test-ok, it is not leak at this moment Check relief valve-ok Check and clean pressure retrol-ok Check Automatic water feeder-ok Check Temperatures & settings-ok Flush boiler twice. Check and run Thermostat- operating Check and clean Indirect Tank operations. Check for leak, no leakage at this moment. Check stat-relay control-ok Check safeties-ok Check circulate pump-okay Indirect tank operating fine at this moment. Run and test system, runs fine, left system operating well at this time.. View visual findings from this
NO AC - TRANE - Upon arrival found system off, client mentioned that system was turned off due to condenser not running on call for AC. Checked thermostat, noticed outdated thermostat on controlling air conditioning system, set tstat to cooling and dropped temperature. Checked air handler in attic. Noticed ducts aren’t insulated. Checked delta T, checked filter and replaced. Checked condensing unit refrigerant pressures ok, Pressures in system is ok at this time, checked delta T receiving good temperature split. Informed client on return visit highly recommended replacing his old model Honeywell Thermostat. Follow Up Action: Office to contact client regarding Thermostat Replacement. Client currently has AC at this time. Reviewed work completed, emailed work summary, collected payment.
Performed maintenance on one AC system located in the basement checked electrical and mechanical components and electrical connections and flushed condensate drain and condensate pump checked evaporator and condenser coils and refrigerant pressures recommend to replace the capacitors for the air handler and the condenser which are compromised and not within manufacture specifications To replace the capacitors for the air handler and the condenser which are not within manufacture specifications
Completed maintenance on two AC systems checked electrical and mechanical components and electrical connections and purged condensate drain lines and condensate pumps also checked evaporator and condenser coils and replaced filters the capacitor for the first floor system is leaking oil and highly recommend to replace To replace the capacitor for the first floor blower motor turned systems on and checked operations and refrigerant pressures left systems working
AC Systems. x2) furnaces units W/ Evap coils. x2) condenser units. Today, I arrived on site to perform an A/C systems tune-up and cleaning. Here's what I did: Checked the blower motor and thermostats for proper operation-okay. Air filter: replaced. x2) 12x12x1 x2) 14x24x1 Checked and cleaned the exterior jacket and interior cabinet-okay. Found the blower wheel-okay. Checked the ductwork-okay Washed and cleaned the indoor Evap coil. Checked and cleaned condensate pump and drain line, treating it with anti-algae. Monitored the refrigerant operating pressures-okay. The refrigerant type are 2x) R410A. Inspected the safety devices and found them to be operating properly. Inspected the electrical disconnect box for safe installation-okay. Inspected and tightened electrical wiring connections-okay. Tested and inspected the contact, which is not burned Inspected the electrical for exposed wiring-okay Inspected and tested the capacitors-okay. Inspected the fan blade-okay. Cleaned the condenser
