P.O. # 1127 20% Due Upon Contract in the amount of $4,277.21 40% Due Upon When permit is "in hand" in the amount of $8,554.42 **Plus Permit Fees Paid On Your Behalf** 40% Upon Completion in the amount of $8,554.42 Supply and install wiring for four (4) customer supplied EV chargers in parking garage at "car-lift" area. Provide conduit and wire from existing electrical panel in meter room on same level adjacent to the EVSE. Mount EV pedestals with Wall Box Pulsar Plus 48 chargers. Connect chargers to utilize the "Load Share" feature of the chargers. Run new surface mounted conduit and wire from the new EV panel to four (4) wall mounted locations on the second level parking locations. Provide engineering, permit application and inspections. Note: Our design subject to Miami - Beach building department comments and approval TBD.
Hey David! Thank you for calling kings electric & a/c for your electrical repairs. As you explained to me before you had another electrical company out here and they told you they couldn’t resolve the issue you are having with your landscaping lights. Today after troubleshooting and looking at all the wiring for the fixtures, I was able to redo a few connections and I was able to get all the lights working and replaced the old bulbs with the bulbs you provided me with. If you have any questions or concerns, please give us a call, we appreciate your business. I hope you have a great Day! Your electrical technician, Xavier
Hey Eric! Thank you for choosing Kings electric & a/c for your electrical needs. Today when I came into your home you guided me to the kitchen and showed me the issues you are having with the under cabin lights and where it’s controlled from. After troubleshooting and opening up the switch box, I found that 1 of the circuits isn’t working at all. I was able to bring power back to the switches and now your under cabin lights are working 100% once again. If you have any questions or concerns, please reach out. I hope you enjoy your weekend here in Miami before you go back home to New York. Your electrical technician, Xavier
1)-----Found location of short in circuit at wire mold in corner connected to GFI outlet in kitchen. 2)-----Disconnected GFI circuit. 3)-----Run new 20 amp line from panel to desired location of new GFI outlet. 4)-----Install junction box at line and GFI with cover plate.
