OUTDOOR- 1)-----Remove 150 amp outdoor main breaker panel and disconnect to well pump. 2)-----Install new 150 amp outdoor 8/16 circuit main breaker feed thru panel. 3)-----Install switch for well pump and wire into panel on dedicated 20 amp 2 pole circuit breaker. 4)-----Update grounding system: includes 2 ground rods, 1 water pipe ground and 1 low voltage ground bridge interconnected with #4 gauge bare copper wire. 5)-----Replace aluminum wiring from meter to main and from main to in house panel with #1/0 gauge copper wire. 6)-----Label panel and clean area. INDOOR- 1)-----Remove 150 amp indoor main lug circuit panel. 2)-----Replace with new 150 amp indoor 20/40 circuit main lug panel. 3)-----Remove aluminum wiring to range circuit. 4)-----Replace with #6 gauge copper wire. (Approximately 50 ft. * 3 runs) 5)-----Label, rough patch and clean.