This service experience was over and above what I expected, and I highly recommend Kings Electric and Air Conditioning for at home repairs.
Prompt, professional, excellent service, top notch, polite..we were very impressed
Third time we've used King's Electric. Highly recommend them. Very professional - and they treat you like family. They keep you informed, explain the project, stick to their estimates. Courteous and efficient. We highly recommend them.
highly recommend King's electric. Excellent, professional service. Prompt, courteous, able to work around any obstacles that came up. Accurate estimate and excellent work. We were very pleased with Phil and the entire experience with King's Electric.
Great service. The technician was very informative regarding our issue. He was extremely professional and efficient. We will definitely use King's for any of our future electrical needs.
Replace (1) dimmer toggle switch
Diagnosis water heater has no power Found burnout wires inside the electrical junction box Need to install new junction box and re-wiring wires
Replace (1) GFI in garage
1)-----Install customer supplied light dimmer switch at foyer. 2)-----Disconnect spa circuit breaker and depower circuit and wiring circuit.
Install customer supplied door bell button. Remove existing foyer chandelier. Assemble and Install customer supplied chandelier in foyer. Supply and install 4 hardwired and interconnected smoke detectors with 10 year lithium battery back up. Remove back patio security light. Remove back patio GFI cover plate and install in use weather proof bubble cover.
Diagnosis level 1
Hang (2) sconces lights on the wall in bedroom where already has (2) outlets
Diagnose laundry outlet not working and just check kitchen outlets for proper voltage only.
1)-----Remove exisitng flourescent fixture in garage. 2)-----Reroute wiring to fixture to different location. 3)-----Reinstall flourescent fixture. 4)-----Extend circuit from attic outlet to desired location of garage door outlet. 5)-----Install junction box with outlet and cover plate.
Install (2) lights in back of home Install (3) lights in front of home
1)-----Remove and replace 2 bulb 4 ft T12 flourescent ballast. 2)-----Remove and replace dining room dimmer switch.
1)-----Run dedicated 60 amp line from indoor 100 amp main lug panel to desired location by pool equipment/hot tub heater using Romex through the attic and sleeved with 3/4 inch pvc on exterior. (Approximately 50ft.) 2)-----Install 60 amp nonfuseable disconnect and a 6ft. power whip to connect to hot tub heater.
1)-----Troubleshoot fan circuit to find out why fan is not turning on. FOUND: bad fan, fan not working. 2)-----Remove exisitng fan. 3)-----Assemble and install customer supplied fan.
Diagnosric and repair on bedroom outlets not working