Installed a portable A/C unit to cool the control building for the tower. The outlet air was adapted to fit the louvres on the door. The portable unit was operated and monitored after install. The thermostat was set at 70 and the control room is cooling. Thank you, Jon
***(*))*******(*)*(*)**)**)*)*)* Dispatched from Lees summit @ 12:45 Arrived on site @ 1:55 Left site @4:10 Closed ticket in Wellsville KS @4:43 ****parts info below***** *)**&(*)**)&((&)&)*)(*(*)**(*((&(&(& Today (9/8/25) I arrived at the radio tower and met with staff that opened the gates and the door to the control room. The mini-split system that serves the control room was running however it was not cooling at all. The system w as checked and it was discovered that the blower wheel was not turning as fast as it should. The evaporator coil was lifted and it was discovered that the blower wheel had failed where it attaches to the motor. A search a replacement blower wheel occurred via Mitsubishi suppliers locally and a replacement wheel was not found in stock. The gates and door to the control room were locked when we left. I contacted April and relayed the results. Thank you, Jon Tech notes: Mitsubishi, m/n MSZ-GL18NA ***(((((((((*(((()((()(*(*********(((*((
Completed full cooling maintenance. Cleaned outdoor condenser and inside filter with dry nitrogen, tested all cooling functions. This system is running as it should be at this