I am extremely pleased with the work and the professional attitude of the manager and technicians that undertook the spring service of my mechanical system and startup of my AC unit. Tom Greene is an excellent representative of Morehart HVAC and an outstanding manager and technician. I have complete confidence in the advice he gives me.
Overall Experience
Quality
Price
Convenience
As always, Brian arrived on time and performed all the needed service. He proposed several "fix-its" but did not pressure me. He is a true professional, and I really appreciate having him as my HVAC technician.
Overall Experience
Quality
Price
Convenience
What a pleasure to have courteous, efficient service with no pressure for extra “repairs “.
Overall Experience
Quality
Price
Convenience
Morehart Air & Heating is an excellent and trustworthy company! Tom G., you did an excellent job servicing our units today, as usual!!!
Overall Experience
Quality
Price
Convenience
Tom just finished a service on our hvac system. We appreciate that Tom continues to do our service. He is congenial, knowledgeable and we sincerely believe that he has our best interest at heart. Glad to work with a company where the customer is valued. Best wishes, and “thanks” to Tom.
Overall Experience
Quality
Price
Convenience
Extremely satisfied with the service I received today from Leo Garcia ! He was prompt arriving at the scheduled time.
Overall Experience
Quality
Price
Convenience
Overall Experience
Quality
Price
Convenience
Brian did a thorough review of our AC system. He found one part that will likely need replacing at some point in the future. Brian was friendly, professional and very knowledgeable. He called 30 minutes prior to his arrival and showed up on time. I have only positive things to say about Morehart AC/Heating. I have used Morehart since we moved to Buckeye several years ago. The service has always been very good.
Overall Experience
Quality
Price
Convenience
Been doing business with Morehart for several years. Brian is my 'go to' guy. Always friendly and no pressure. Real asset to the company.
Overall Experience
Quality
Price
Convenience
Installing a new Goodman split system in the attic in the Valencia neighborhood in Buckeye, Az
Installing a Goodman 3.5 ton 14 seer heat pump split system in Buckeye, Arizona.
In Buckeye, near West Runion Lane and North 264th Avenue performing a diagnostic on a Daikin mini split. On arrival, found fuse on mini split loose. Tightened up disconnect and reinstalled system. System cycled on and, upon departure, is running properly and within manufacturer specifications.
In Buckeye, near Sun City Festival performing Fall preventative maintenance on an Amana furnace. Completed service in accordance with maintenance checklist. Upon departure, system is running properly and within manufacturer specifications.
In Buckeye, near Sun City Festival performing Fall preventative maintenance on an Amana furnace. Completed service in accordance with maintenance checklist. Upon departure, unit is running properly and within manufacturer specifications.
In Buckeye, near Sun City Festival performing Dual preventative maintenance on 2 York split systems. Upon arrival, customer said upstairs unit was not working. Found unit low on charge and blower motor with assembly has failed. Down stairs system is low on charge as well. Unit is intermittently engaging due to a failed capacitor. Inspected coils in attic and both have heavy rust occurring. Systems use R22 which has been phased out. Recommend replacement of both systems due to Freon type, age, and many other conditions. Units are not functioning upon departure.
In Buckeye, near Sun City Festival performing a Dual preventative maintenance service on an Amana split system. Completed service in accordance with maintenance checklist. Customer has concerns with AC vibrating wall, recommend the line set be buried. This will involve recovery of system, piping new line set at exterior, and replacing filter drier. In addition, during service, noticed secondary pan is getting water stains from supply ducting. Recommend replacing plenum boxes to system that are the right size for system and have a higher r value. Customer said she rents, and will let homeowner know about repairs.
In Buckeye, near West La Pasada Boulevard and South 221st Drive performing Fall preventative maintenance on 2 Goodman split systems. Upon arrival, cycled units into heating mode. Replaced intake filters and took temperature reading from supply and return. At units, cleaned and tightened electrical connections. Took volts and amp draws from components. Checked Freon levels with super heat and subcool. Recommend hard start kid due to noisy compressor during start up. Washed and rinsed outdoor coils. Upon departure, units working properly and within manufacturer specifications.
In Buckeye, near Sun City Festival performing Fall preventative maintenance on a Lennox furnace. Upon arrival, cycled unit into heating mode. Replaced intake filters and took temperature reading from supply and return. At furnace, took volts and amp draws from components. Checked and cleaned all sensors and safety switches. Inspected inlet and outlet gas pressure. Also took static pressure from return and supply. Cleaned and wiped down furnace. Inspected tankless water heater and made sure connections were tight and nothing loose. Vacuumed out water heater as well. Upon departure, unit is working properly and within factory specifications.
In Buckeye, near West Magnolia Street and South 256th Avenue finishing install of compressor. Upon arrival, found compressor operational without movement of refrigerant. Removed power from reversing valve and refrigerant levels would not change. Found restriction in reversing valve causing compressor to short out wingdings. Need to get authorization from home warranty company to supply OEM part from Trane.
In Buckeye, near Sun City Festival performing routine seasonal maintenance on an Amana furnace. Checked attic furnace volt and amp draws. Checked Aprilaire filter and it needs changed out. Air scrubber is working properly and drain lines are good /pan is clean. Cycled system on in cooling. Checked volt and amp draws on condenser. Cleaned and tightened electrical connections. Checked Freon levels and pressures. Everything is within manufacturer specifications.
In Buckeye, near Sun City Festival performing seasonal preventative maintenance on a York gas furnace. Cycled system on in cooling. Checked volt and amp draws. All in factory specification. Cleaned and tightened electrical connections. Checked Freon levels and pressures, also in factory specification. Cycled system on in heating. Burners adjusted properly. Gas line and flue piping both sealed and proper. Removed and cleaned out flame sensor. Checked back pressure and safety switch. All in working order. Changed return air filters. Recommend upgrading the system because of age and use of R22 Freon. Coil has normal rust for age of system, but is running OK at time of service.
In Buckeye, near Sun City Festival performing Fall maintenance on a Carrier condenser. Upon arrival, cycled unit into cooing mode. Replaced intake filters and took temperature reading from supply and return. Took volts and amp draws from components. Re tightened Schrader core due to being found loose. Washed and rinsed outdoor coils. Cycled unit into heating mode and took volts and amp draws from components. Found oil on base of blower motor due to seals being worn out. Cleaned flame sensor and remounted on bracket. Cleaned and tightened electrical connections and cabinet.
In Buckeye, near West Portland Street and 30th Avenue performing a diagnostic on a Daikin mini split condenser. Upon arrival, I noticed oil coming from the second port on condensing unit. Removed all covers to air handlers and re tightened fittings; got into attic to make sure no leaks were present on copper fittings or line. In master air handler, noticed oil or condensation on evap coil. Tested with soap bubbles and leak detector, but no sign of leak presented.
In Buckeye, near Sun City Festival performing a diagnostic on a Carrier condenser. Found contactor to have some burning and pitting. Installed new single pole 40 amp contactor. Upon departure, unit is running within manufacturer specifications.
