Response from Perfect Service Heating & Air:
We are glad we were able to address your concerns and make you a happier customer.
CAME OUT ON A SERVICE CALL, A/C. CHECK THERMOSTAT, CHECK FREON LEVELS, CHECK CONDENSER COIL, CHECK ALL ELECTRICAL CONNECTIONS, ADJUST BLOWER COMPONENTS. EVERYTHING IS RUNNING GOOD.
CLEAN AND CHECK A/C. CHECK AIR FLOW, CHECK ALL ELECTRICAL CONNECTIONS, CHECK CONDENSER COILS. INSTALLED 1.5 TON HP/AH W/ T-STAT. MADE SURE EVERYTHING WAS INSTALLED PROPERLY. MADE SURE AIR WAS FLOWING GOOD. EVERYTHING IS RUNNING GREAT.
Maintenance work completed on 2010 Trane package unit, checked fan controls, cleaned condensation drain.
Cleaned and sanitized the Heil air condensing unit with Zep con-coil cleaner, no repairs needed.
Cleaned and sanitized the 2015 air condensing unit with Zep con-coil cleaner, no repairs needed.
Service work performed for the 2010 Trane air condensing unit. Cleaned condensation drain.
Service work performed for the 2015 Heil package unit with heat pump, cleared condensation drain. No repairs needed.
Service work performed for Heil 2012 air conditioning unit with heat pump. Checked condensation drain and cleaned condensing coil with Zep con-coil cleaner. Replaced filter.
Installed 2017 Heil air conditioning unit with Heat Pump. 12yr warranty on parts and labor.
Cleaned and safety checked Heil air conditioning unit with Zep Con-coil cleaner. No repairs needed
Cleaned and Serviced Heil air conditioning unit with Zep con-coil cleaner. Installed New UV whole home purification unit.
Cleaned and checked 2015 heil air conditioner.
Heating maintenance on a 7-year-old Carrier. Check the pilots and igniters to make sure furnace cycle turn on and of as it should. Check the gas pressure to make sure the pressure is not too high or too low.
Heat tune-up on a 5-year-old, 4-year-old, and 3-year-old Heil. Check the burner assembly to remove any rust or dirt off the burners, so that gas can flow properly and efficiently.
Bryant repair on the 2-year-old unit. Adjust blower components. Proper adjustment and cleanliness of blower and components are necessary for adequate air flow.