Chris came right on time, patiently walked me through what was going on with my AC unit. Was so respectful and knowledgeable about next steps. Gave realistic options, and completed the repair so timely!
Technicians arrived when they said they would and took no time to tell us what the problem was. I will be using this company for any future services we may need
Would tell others
We had a very nice experience with our service man. He was polite and friendly and took care of the issue on the spot.
Supplied a good analysis and options for solution
Fast, timely and knowledgeable
2nd visit, Mike was professional as always.
Diagnostic service performed on the General Electric Furnace unit. The technician and the customer decided to go ahead with a new system that will be installed at some point this week. The system will be a Carrier FX4D Electric Furnace (Up to 3 ton).
Diagnostic Performed Tested Gas Valve & Reset Pressures On Carrier Gas Furnace To Keep Furnace Running At Highest Performance For The Winter Season
Reset the damper systems to allow for more consistent heating from Carrier furnace. The furnace itself is running properly and efficiently at this time.
Performed a tuneup and safety inspection on an older Rheem furnace. The limit switch inside is shutting the furnace off prematurely. The switch is going bad. The customer requested a quote on a new furnace.
Diagnostic Performed Re-Adjusted Gas Pressures On Carrier Gas Furnace To Keep Furnace Running Efficiently For The Winter Season
Diagnosed a Rheem furnace with heat exchanger that failed the combustion test. The vacuum pressure switch is bad as well. Both will need to be replaced to fix the issue of no heat.
Diagnostic service performed on the Rheem Gas Furnace unit. Confirmed that the system is working within manufacturer specifications. Pictured is the customer's Rheem Gas Furnace Unit.
Furnace tune - up and safety check performed on a Carrier Gas furnace unit. Confirmed that the system is working within manufacturer specifications. Pictured is the customer's Carrier Gas Furnace Unit.
Furnace was blowing cold air due to the high limit had no continuity. The limit was removed and the furnace cycled. Blower wheel and coil are both dirty and need cleaned. Recommended changing out the high limit. Customer decided to purchase new system rather than repair.
Performed a tuneup on a Carrier gas furnace. The system is operating within manufacturer's specifications and is ready for the winter season.
Diagnosed faulty igniter on a Luxaire gas furnace. After replacing the igniter, the system is running properly and efficiently, and is ready for the winter season.
Furnace tune - up and safety check performed on a Comfortmaker Gas furnace unit. Confirmed that the system is working within manufacturer specifications. Pictured is the customer's Comfortmaker Gas Furnace Unit.
Customer complained that the Bryant gas furnace hasn't operated correctly all week. Went over the system and tested all components. Pulled tubing and cleared the furnace. Problem may be intermittent and will need to be monitored. Furnace is running properly at this time.