Came out did a diagnostic fee on grinder pump. The float switch just got stuck on top of the grinder pump. I readjusted the float switch to where it wouldn’t get caught back on the pump. And tested everything out after testing everything out found that there was nothing else wrong. Everything is good to go and customer satisfied.
Arrived today for no cooling on 2011 3 ton heat pump Carrier. Found indoor coil leak Freon and 45+5 capacitor needs replaced on outdoor unit. System is 14 years old highly recommended upgrading system due to age of equipment. But give customer options on repairing system. Customer wants system replaced. Scheduled with office to install on Friday between 8 and 10.
Replace a celling fan and install a new switch The Works Membership Priority Scheduling No service fee during normal business hours 10% discount 2 times a year hvac service up to 2 systems plumbing inspection and water heater flush Electrical inspection
Completed installation of a Bryant energy-efficient heating and cooling system. Installed a high-efficiency furnace with a variable-speed blower motor and a two-stage compressor for optimal comfort and energy savings. Integrated with a programmable thermostat to enhance temperature control and efficiency. Conducted thorough testing to ensure proper functionality and efficiency of the system. The installation provides reliable heating and cooling while reducing energy consumption for the homeowner.
Spring Air Conditioning System Tune-up for a commercial client. Technician sent to perform. Checked system for debris. Checked refrigerant levels. Checked and cleaned coils. Checked capacitors. Replaced filters. The system is operating at optimum performance to cool the business during the Spring/Summer seasons.
Air conditioning maintenance for a residential client. Air conditioner not working. Technician sent to repair. Condenser fan motor failure. Replaced condenser fan motor, liquid line sensor, and ambient sensor. The system is operating as it should at this time.