I was called to repair an HVAC system for heating in Woodstock, AL. The system, a Trane XR95, was not producing heat due to a faulty igniter. I replaced the igniter with a new Trane OEM part and also inspected the heat exchanger for cracks. After replacing the part, I tested the system, ensuring it was running efficiently and heating the home properly. The furnace is now back in good working condition just in time for the colder weather.
I repaired a leaking toilet in Woodstock, AL, caused by a worn-out fill valve. I replaced the old fill valve with a Fluidmaster 400A and adjusted the water level to ensure proper flushing. After testing for leaks and making sure the toilet was refilling properly, I also checked the water supply line for any issues. The toilet is now working efficiently, with no leaks or issues.
I repaired a Bradford White 50-gallon gas water heater that had been intermittently shutting off. Upon inspection, I discovered that the gas control valve was malfunctioning, causing the pilot light to extinguish. I replaced the faulty gas control valve and relit the pilot. I also checked the thermostat and ensured the temperature was set correctly. After the repairs, I monitored the system for an extended period, confirming it remained operational without shutting down. The customer now has consistent hot water, and the system is running efficiently.
Cleared a clogged and backed-up shower drain using a RIDGID K-45 drain cleaner with a 5/16" x 25' cable. Removed hair, soap scum, and other debris causing the blockage. After clearing the drain, thoroughly flushed the line to ensure smooth water flow. Inspected the P-trap and drainpipe for any additional obstructions or damage. Regular drain maintenance is essential for preventing clogs and maintaining efficient plumbing. For professional drain cleaning services, contact us to keep your system running smoothly.
I was called to replace a shower valve that was leaking in the wall in Woodstock, Alabama. Upon arrival, I found that the shower valve was leaking from the handle. I removed the old valve and replaced it with a new one, ensuring a tight seal. I also replaced the shower arm and shower head to ensure proper functionality. I tested the valve to ensure it was working properly before leaving the job site.
Plumbing Repair. Residential Homeowner with a leak in pipes. Plumber sent to troubleshoot and repair. The copper wire had a pinhole. Replaced copper pipes in the master bathroom. The leak has been successfully repaired for the homeowner.
Water damage restoration for a residential client. Rainwater flooded basement. Technician sent to remove moisture and sanitize the affected area. Industrial-sized dehumidifier and fans used to remove any lingering moisture from the basement and prevent mold and mildew. The basement is now clean and dry. Customer happy on departure.
No heat coming from residential customers' standard gas furnace. Technician sent to diagnose and repair the issue. Heat pump malfunctioning. Coils and fan cleaned. Filters replaced. The unit is now working as it should. Customer happy on departure.
Completely rejuvenate drainage under sink And installed new disposal. Replaced both hot and cold cut off valves including wiring into an existing circuit. Replaced refrigerator line with new 1/4” copper. Flushed out sediment and calcium in water heater.
Central air conditioning system not blowing cold air. Check thermostat and set properly. Replace dirty air filter. Inspect outside of HVAC system and check electrical system. Repair air compressor and AC system running and cooling home. Check slow plumbing drains and clear system.
We pumped out septic tank, checked field lines , also unstopped main line
Repaired heat pump on emergency heating and air call check Freon levels repaired wiring issue and replace thermostat
Emergency plumbing call repair copper waterline checked out plumbing system install pressure reducing valve and tested
We pump thousand gallon septic tank system repaired field lines inspected tank and unstop mainline