Overall Experience
Quality
Price
Convenience
Chandler is the best! He always delivers quality work and superior results. Schuelke Plumbing is top-notch, with no comparison. I recommend them for any job! Nothing is too big or small. If you want honest and trustworthy people working for you, only trust Schuelke
Response from Schuelke Plumbing Inland Empire:
Thank you very much for the great review. We love to hear that our customers are very satisfied with our work. Thank you for your business!
Overall Experience
Quality
Price
Convenience
Overall Experience
Quality
Price
Convenience
Schuelke Plumbers are the best! I have been in maintenance and construction my 40 year career with the USPS. These men, are experienced, knowledgeable and care about the job getting done as quickly as possible. Great job!
Overall Experience
Quality
Price
Convenience
So much cheaper than the major 24 hour companies. Plumber was polite and informational. A quote was provided for the temporary fix and permanent work.
Overall Experience
Quality
Price
Convenience
Customer has an existing septic tank with failed leach lines. They are wishing to have septic tank eliminated and new sewer main ran to connect to city sewer. Customer states there is already a city lateral stubbed out onto his property for us to connect to
Performed free camera inspection of customers sewer main via cleanout on side of home. There was several different root intrusions and holes throughout the sewer main. Was unable to past large root intrusion that I located under the sidewalk approximately 7’ deep. Explained to customer I recommended digging up sewer main where it exits the house and shooting a liner out towards the street. Will need to Hydrojet and prep the line before shooting epoxy liner
Customer has leak where main feed for home ties into the existing shut off valve. In order to perform repair we will need to shut down water to the property and remove existing gate valve and install new quarter turn brass ball valve
Customer complains of loud vibrating noise throughout building when water is ran specifically on hot side. After further inspection it appears that the hot side of the kitchen faucet is not working properly and more than likely the cause of the vibrating noise. Explained to customer that hammer hammer is a result of several different things but Recommended replacement of kitchen faucet to see if problem still persists.
Snaked unit 250 via accessible cleanout to remove clog. Performed camera inspection and saw customer had a large root intrusion. Highly recommend performing spot repair on root intrusion in order to prevent future clogs
Upon arrival I was able to determine that customers 1/2 hot copper water line coming from water feeding the manifold located behind the shower that is leaking. Recommended performing a re route as we have been doing for the other units. Performed re route to the half inch copper water line that was leaking. Re routed new line from water heater over to the manifold behind shower. Upon opening drywall behind water heater we saw that customer had some electrical that appeared to have been damaged due to either mice chewing on it or from when the electrical was ran. Notified management of the issue.
Attempted to snake mainline from cleanout on side of office. Was un able to get clog cleared. After further inspection it appears the whole row of units are backed up. Attempted to clear clog from other cleanouts but was unsuccessful. Explained to customer that hydrojetting will need to be performed either via acess behind unit 277 or 275. Quoted 495 for first two hours. 195 for every hour after
Several units around 207 where clogged. Performed hydrojetting via cleanout behind unit 207 and was able to clear clog. Followed up with camera inspection and saw the claim sewer main had several low spots which I believe to be causing the clogs.
Was able to clear clog for unit 218. Performed camera inspection and saw customers sewer line where cleanout and sewer main connect has flattened causing issues with drainage. Recommended digging this section up and repairing to prevent further clogs. After clearing clog for 218 management explained that unit 266 was clogged as well. Removed clog and saw customer has large root intrusion which was the cause of the clog. Recommended digging this section up and repairing damaged section to prevent further clogs. After clearing these two clogs Maitnace notified me that several units around 207 where clogged as well attempted to clear clog but was unable to with my cable snake and recommend hydrojetting for 495.00
Customer has a offset and root intrusion on cleanout riser approximately 3’ deep. Recommended digging up cleanout and replacing damaged section of pipe. Upon exposing riser for cleanout we saw that riser had snapped off and separated from fitting of cleanout which was allowing the roots to enter nWe removed old riser and installed new riser and Jim cap. Performed camera inspection and didn’t see any further issues.
Customers 1” Watts pressure regulator had a pin hole leak it it. Shut water off to the house and replaced regulator. While working on regulator I noticed the 1” ball valve in front yard was not shutting off all the way. Recommended replacement of ball valve.
Performed camera inspection of sewer line via accessible cleanout for kitchen line located on side of the house as well as camera inspection of sewer main cleanout that was located in front yard. After performing inspection via main line cleanout I noticed customer has a root intrusion and offset at riser for the 3” cleanout. Recommend digging up this cleanout to remove damaged section of pipe and plumbing in new section in order to eliminate root intrusion. The rest of customers sewer main and kitchen drain appeared to be in good condition with no other issues.
Customer has water damage to ceiling and surrounding walls in living room under upstairs bathroom. Recommended performing proper mitigation to prevent further damage. Leak appears to be a drain issue. Once drywall is exposed we will be able to run test to determine what exactly is leaking. Once leak is identified we will be able to give separate price for repair
After performing leak detection I was unable to determine that there was any leaks on the water system. I listened to manifold and angle stops and could not hear anything. Checked meter for several minutes and meter was not moving which is a good indicator that there is not a leak on the water system. Inspected behind units bathtub via access panel. Noticed the drain basin was full of water. Ran water in the tub and immediately water started flowing out from the over flow. Replaced overflow drain and gasket to stop leak. Explained to manager to keep an eye on the unit and the moisture in the walls and carpeting in the bedroom continue then to let us know.
Customer had a hot water leak from water heater over to manifold behind shower valve. Instead of performing direct access repair we instead re routed the line over head. Customer had sever water damage that we recommended performing proper remediation