Great customer servie. Called ahead of time. Showed up on time. Discussed the work in detail. Performed the work effectively n efficiently. Very personable indivixual with great customer service skills n a professional. A pleasure to have met Paul.
Overall Experience
Quality
Price
Convenience
Overall Experience
Quality
Price
Convenience
Nearby Now
Nearby Now
Nearby Now
Fine tuned energy monitoring for both units. Went through start up on each unit. Set 7 Series blower speeds to correct settings, set flow rate and recorded heat of extraction. Setup the humidifier to operate from the thermostat. Pressurized the ground loop to 65psi. I had to secure the blower cabinet insulation with some elastomeric compound because there was almost no glue applied from the factory and it pulled away when I removed the cabinet door. I checked the electrical wiring and electrical systems including the auxiliary heat strips, all are within specification. I set the flow rate on the 5 Series split system and recorded heat of extraction. I increased blower speeds very slightly to keep temperature rise across the air coil to <30 degrees. Both units are operating normal. I removed the valve handles from the geo water piping and placed them on the respective flow centers. Customer awaiting 2) Symphony WiFi systems. The office is aware and asked me to tell the customer that
On arrival set units to call for heat measured supply and return air temp measured voltage and amps inspected electrical wiring electrical wires and inspected water pressure and raised it.checked coils,Contactors.caps.replaced package unit cap.rated for 80 uf and actual was 63 .all units are operating normal at this time
5.12.19 install Code required back flow valve for the basement bathroom waster drain connection.
On arrival found system locked on fp1 15 times .checked system operation.checked EWT AND LWT .omhed fp2 And fp1 sensor. I then replaced fp1 sensor,case number 510969.unit operating normal at this time
