175 Hansen Ct Unit 103
Wood Dale, IL 60191
847-966-1950

Local Reviews
for broadview, il


Job Locations
for broadview, il

Cate B.

Cate B. Job Checkin

TECH: Deon Brand :Frigidaire Product :Refrigerator Model No. :FFHT1425VV Model Desc : Serial No. :1K20341455 Install Date :07/14/2022 Retailer NameTHD Call No :8603245001 Source :ELECTROLUX Call Type :IN WARRANTY Service Type :Repair Call Status :Accepted Call Taken :01/05/2023 Problem Descrption :Refrigeration Issues, Operations, No Cool-Rtt No Cool ______________________________ * Update Service Power * Take photos and collect true model/serial number.


Cate B.

Cate B. Job Checkin

TECH: Deon APPLIANCE BRAND: GE APPLIANCE TYPE: Fridge COMPLAINT: Coil cleaning MODEL / SERIAL (if available): Condenser coils were covered in dust. Thoroughly vacuumed the dust off the coils and sprayed condenser coils cleaner on the coils. The temperature were high but advised the customer to allow 24 to 48 hrs to let the temperature adjust in the unit


Jennifer T.

Jennifer T. Job Checkin

whirlpool Built-in Microwave Oven Microwave not turning-Located in kitchen on first level-7083235153-Pet secured-Front door


Jennifer T.

Jennifer T. Job Checkin

The built in microwave not warming up like it should and it have a crack is in the door, the door seems off centered and the handle also cracked and she does not know how; No pets; side door


Terry S.

Terry S. Job Checkin


David H.

David H. Job Checkin

Upon arrival, the fill button was flashing on the Amana Washer. This not an error but a paused cycle. Checked the error code and there are multiple motor errors. Ran a test cycle and the bearing is loud and the test stopped early in the spin cycle. Reset the board and erased errors. Possible stuck board but the unit needs minimally the transmission possible outer tub. Not cost effective. Notified Nicor repair will be over 400 washer is new at 350.


Cate B.

Cate B. Job Checkin

Upon arrival, the fill button was flashing on the Amana Washer. This not an error but a paused cycle. Checked the error code and there are multiple motor errors. Ran a test cycle and the bearing is loud and the test stopped early in the spin cycle. Reset the board and erased errors. Possible stuck board but the unit needs minimally the transmission possible outer tub. Not cost effective. Notified Nicor repair will be over 400 washer is new at 350.