dynamic appliance repair A customer reported that their Monogram built-in refrigerator was not cooling properly. I began by inspecting the refrigerator's temperature settings to ensure they were correctly configured. Next, I checked the condenser coils for any signs of dust or debris that could impede cooling efficiency. I vacuumed the coils and cleaned them thoroughly. I also examined the evaporator fan to confirm it was operating correctly. After ensuring the fan was functioning, I tested the refrigerator's internal temperature to verify if it was cooling adequately. I then inspected the door seals for any gaps or damage that might allow warm air to enter. I found a slight gap and adjusted the seals to ensure a tight fit. Finally, I tested the refrigerator again to confirm the issue was resolved. The refrigerator is now cooling as expected.