Our company products move about 2 billion people a day, all across the world. I can't think of any company I'd rather work with to keep our elevators safe and functional than Vantix Electric. Great service, and a pleasure to work with.
These folks are consummate professionals, top to bottom.
The other day I helped one of the foremen named Mauricio on an work order. I helped him to unstick the lift he needed. He checked the 2nd light pole and found it was not the light bulb, but a bad capacitor, ignitor and transformer.
Today I am working on installing temporary lights and a temporary pole. Slowly but surely its coming together.
The crew and I started a new project in Atlanta. We are installing lights and getting ready for wall cover inspection.
The other day I re-ran existing coax and cut in missing devices for water fountain and microwave. I also attached tap boxes for floor boxes above the ceiling. If you are looking for an electrician in Atlanta- Vantix Electric is the commercial contractor for you.
Today I continued the demo and started running conduits for lower levels. Received lighting package today and I am starting that tomorrow.
Today I worked on finishing and painting wall. Tomorrow I am having inspection of all the work we have done so far.
Yesterday I went to Alpharetta to work on a project. I am continuing to install 10 emergency circuits. Ran conduits from junction boxes to area where circuits are needed. The crew and I are repairing the items that we have found that needs to be. We have started installing all devices in the space . We hope to be 90% done today we only need the clearance to get ahead and fix service so we have emergency power on the first floor.
I worked in Atlanta today! I started working on the kitchen. I relocated drivers for the bar, Lastly the crew and I pulled string 3" conduit.
A couple days ago I worked out in Hillsboro Building. I Piped in electrical for Condensation pump, GFCI and wall switch. Demo electrical that was coming from elevator feed. Rerouted emt that was feeding hallway and parking area. Ran temp wire to feed pit lighting and cab lights. Lastly, I framed ceiling for Sheetrock installation.
The other day I installed new flex and wire from existing disconnect for duct heater power. Wired into heater unit and tested for power. Now I can finally scratch that off my to do list.
Today IN Morningside at Belmont I patched holes in machine rm Block wall, patched hole on elevator landing 8,7,6,2,1 and basement floors. Ran 20ft of 1" EMT for lobby panel. Installed lobby panel behind desk. Will finish installation of lobby panel and patching hole where old buttons where Installed. If your looking for an elevator MOD specialist the Vantix Team will take care of you!
Today the crew and I continued installing conduit in basement and continued pulling WP cable to roof. Finished connecting conduits from first floor electrical room to basement and started pulling cable for the elevator pit feed and the front stairwell feed. The framers still haven’t finished the 4th floor corridor ceiling and haven’t continued any framing on the first floor. The plan for Monday is to continue installing conduit in basement and finish pulling WP cable to roof and finish pulled cable for front stairwell and elevator pit and start roughing in 4th floor corridor ceiling. Feeling great and lots to do.
Today in Atlanta I ran 2" and 1" conduit PVC. Big blue sky out here in Atlanta today.
Today I got a lot done! I changed sump pump in pit of elevator #1 to 63 gallon an minute. Elevator #2 installed raceway and Octagon box for each landing 3rd, 2nd, 1st & basement floors. Started to frame ceiling for Sheetrock. Installed 1900 box for new light switch and GFCI.
Today I am working in Canton on a commercial building. I continued on box layout, I started wall rough and its 60% complete in walls. Rooms 112 and 116 just got finished today.