Run 50 amp circuit in garage for plug in car charger I installed a 50 amp car charger plug. I installed the 1900 box then ran 1 inch pvc up the wall in the garage over the garage doors then converted it over to seal tight. I went in the wall down to the panel. Then I ran my wire through the pipe. I landed my wires on a new 50 amp two pole GFCI breaker. Then installed the outlet. I tested the outlet and the breaker. It’s putting out 240 volts I then spackled any holes created over the panel Customer did not want a surge protector at this time and also didn’t not want us to service the electrical panel. The work I preformed is protected by a 1 year warranty