The reason for today’s visit with the customer was a dish washer that was tripping constantly when not in use. After meeting with the home owners aunt, i was then shown the panel location in the basement where i saw 2 main panels each being 200 amp , and a 2 sub panels with a generac back up system attached. The main panel on the left (Bryant) had many uncapped wire’s along with hazards such as open circuits and Sensko surge protection. The panel on the right was not showing any hazards but did however house the circuit for the tripping breaker today. The circuit for the dish washer was an arc-fault dual function breaker that i changed for testing and unhooked the dishwasher (hardwired) itself. When i turned the circuit back on the breaker did not trip and stayed on. When i then hooked the appliance back up and turned the circuit back on, without even running a cycle the appliance tripped causing the circuit to turn off. I explained to the home owner i was suggesting that the dishwashe