I ran a 6-2 romex (40 amp circuit) from the main electrical panel in the basement behind the finished walls to prevent and hole the customer would have to patch into the unfinished area in the basement then up into the joists over to the wall where the basement ends and the garage begins. I drilled a hole and ran the wire into the garage through a piece of pvc pipe to protect the wire. I ran it into a disconnect. Installed a 40 amp breaker then took a piece of seal tight and ran wire into a customer supplied car charger. Then I made all the terminations I installed a 40 amp Homeline breaker in the main electrical panel This car charger is hard wired and can not be moved without a licensed electrician. Not a mobile charging station Customer has 1 year warranty on work preformed