Customer has no power to dryer. Turns out dryer circuit is located on second floor panel where there is no power. Let us know if you have any questions. Thanks!
This solution includes the installation of a new receptacle for bidet and a replacement GFCI. In addition we shall install a 15A breaker for the 14 gauge wire in panel. We have installed a new receptacle for bidet. In addition we have replaced the existing gfci in bathroom and replaced the 20A breaker with a 15A breaker.
This solution includes the installation of a customer supplied ceiling fan in the upstairs bedroom. In addition we shall replace the existing gfci receptacles in the kitchen. Lastly we shall install a new ceiling fan in the stairwell. We shall return when the customer supplied materials arrive, customer to call in and schedule. Membership acquired. We have installed 3 customer supplied ceiling fans on the second floor. Lastly we have replaced the existing GFCI in the kitchen area. We recommend having the smoke detectors replaced.
Customer was experiencing a breaker that controlled her bathroom lights and kitchen lights on first floor that kept tripping. After preforming a diagnosis i found that the switch by the back door in the kitchen in the three gang switch box was causing a dead short when the switch leg was energized. Also the switches were damaged and older in that circuit so i removed the switches in the kitchen and the bathroom and re spliced inside the boxes to make the electrical connections safer and more secure