Tech John diagnosed issue with steam shower not working and issue with kitchen receptacles tripping. The steam shower timer switch was found to be disconnected from the wiring. The wiring was hooked back up, and the steamer unit was inspected to ensure the wiring and terminations were correct. After the diagnosis, power was restored and the switch was turned on, but no steam was produced. Homeowner was advised to seek an experienced plumber for further diagnosis. The kitchen receptacles were taken apart and inspected, including two plugmold strips on the kitchen island. All of the wiring and terminations looked good. The dual-function breaker would not trip when tested, which indicated a faulty breaker. The breaker was replaced, power was restored, and the circuit was verified to be operational.