Mounted a Tesla Gen 3 Wall Connector in a homeowner’s garage. Ran a new 240V line from the breaker panel and installed a 60-amp dedicated circuit. Ensured proper grounding and double-checked connections for safety. Once installed, I tested the charging system to confirm fast, efficient charging capabilities for their Tesla vehicle.
Responded to a power outage caused by a tripped breaker. Found a damaged 15-amp breaker controlling the bathroom circuit. Replaced it with a new Eaton BR breaker and inspected surrounding circuits for signs of wear. Tested power flow and confirmed no further tripping issues. Restored safe, reliable power to the area.
Installed a Square D Whole Home Surge Protection Device on the main service panel to protect sensitive electronics and appliances from voltage surges. Connected the unit to a dedicated breaker and secured proper grounding. Verified that the surge protector activated correctly during testing. This installation offers long-term protection against power fluctuations and lightning strikes, ensuring household safety.
Integrated smart home automation using the Ecobee Smart Thermostat and Philips Hue lighting system. Installed the thermostat and connected it to the existing HVAC wiring. Set up the smart lighting bridge, linking it to multiple rooms. Configured both systems to sync with the homeowner’s smart devices for remote control. Tested app connectivity and verified proper functioning. The new system provides greater convenience and energy efficiency for the homeowner.
Installed a hardwired Kidde carbon monoxide detector in the hallway outside the bedrooms. Connected it to the home’s existing electrical system with battery backup for added safety. Tested the unit to ensure proper functionality and compliance with safety standards.
Troubleshot flickering lights in the living room. Inspected the wiring and found a loose neutral connection at the breaker panel. Tightened the connection and replaced a worn-out Square D breaker. Tested all affected lights, confirming stable power and no further flickering. Ensured that the entire panel was securely wired.
Replaced outdated two-prong outlets with new Leviton tamper-resistant three-prong outlets in a bedroom. Ran new grounding wires to ensure compliance with current electrical codes. Tested each outlet for proper voltage and grounding. The updated outlets now provide safe, reliable power for modern devices.
Set up a Lutron Caséta Smart Lighting System throughout the house, including smart dimmer switches and a central hub. Installed the hub near the router, ensuring proper Wi-Fi connectivity. Configured the system to allow control via a smartphone app. Tested the lights for responsiveness and ensured all dimmer switches worked without issues. The homeowner now has full control of their lighting system remotely, enhancing convenience and energy savings.
Installed a Leviton 51120-1 surge protection device at the main electrical panel to safeguard the home’s appliances from voltage spikes. Connected the device to a dedicated 50-amp breaker and tested its operation. Verified that it was effectively protecting the circuits. This installation helps prevent potential damage from power surges and lightning strikes.
Repaired a faulty 20-amp breaker in the main panel that was causing intermittent power loss in the kitchen. Identified a worn-out breaker, replaced it with a new Siemens Type QP breaker, and ensured a secure connection. Tested the circuit under load to confirm stable power flow. Also checked surrounding breakers for signs of wear, ensuring reliable system performance moving forward.
Performed routine maintenance on a Tesla Wall Charger. Inspected the charging cable for wear, cleaned the connector, and tested the breaker to ensure proper current delivery. Confirmed that the unit was functioning correctly and ready for consistent daily use.
I installed a Tesla Wall Connector for a homeowner’s garage. Mounted the unit securely, ran new 240V wiring from the main panel, and installed a dedicated 60-amp breaker. Verified proper grounding and tested the charger for correct operation. The setup now allows fast, efficient home EV charging.
In Hyattsville, MD, I installed new outlets throughout a client’s home. I replaced old, worn outlets with Leviton 15-amp outlets and ensured that the wiring was properly connected to each outlet. I tested all outlets afterward to confirm they were functioning correctly, ensuring safe power distribution throughout the home.
In Hyattsville, MD, I installed surge protection for a client’s home. I mounted a Siemens whole-home surge protector at the main electrical panel and connected it to the existing breakers. After installation, I tested the system by simulating a surge to verify it was functioning correctly.
I worked on a Tesla EV charger installation in Alexandria, VA today. After confirming the home’s electrical panel could handle the load, I installed a Tesla Wall Connector. I wired it into the panel, mounted the charger on the wall, and tested the system by plugging in the client’s vehicle to ensure it was working.