Frank installed a chandelier in the bathroom and 2 ceiling fans outside. Very pleased with the work and professionalism.
Overall Experience
Quality
Price
Convenience
Next Friday, oct 10th/ 8-11. Customer needed to add a dedicated circuit for a blowup hot tub in the backyard and also a dedicated circuit for their Traeger. Also needed a three plugs added in the ceiling in the backyard for an oscillating fan a TV and some string lights. And one on the left side in the E their Traeger. Also need a three plugs added in the ceiling in the backyard for an osculating fan a TV and some string lights. And one on the left side in the Eve for jellyfish lighting.
Installed new electrical panel, whole house surge protection
Arrived to look at issue with outlets not operating after the home owner was pressure washing the pack patio and they lost power to the kitchen outlets and back porch outlets. Upon arrival tested the outlet and the gfci were able to be reset and resume operation. Provided a quote to replace the federal pacific panel located in the garage and bring the entire service up to current 2023 NEC code. We will install all safety devices such and the ground system and whole house surge. Oncor will need three days prior notice for disconnect/reconnect. As well as quoting the panel the home owner needs a 40 amp circuit installed to have a new induction cooktop installed as the current circuit is only 20 amp. Quotes are good for thirty days.
Customer was remodeling the kitchen and had taken down a wall, which had a couple of plugs such as the fridge, plug and range plug on it. Explain to customer we would have to install J boxes in the ceiling and extend the wire and put blank covers on the J boxes because we can’t cover it up. Then from the boxes we can extend the circuit down to the desired locations. Explain to customer he will have to pull a permit and we will pull a permit under his general contractors permit. Quote good for 30 days.
Install new dedicated circuit for deep freezer, install GFCI protection
Ran dedicated 20 amp circuit to microwave also added ground rod and surge protection added a 2 plugs right under panel walked customer thru work made sure they understood how to reset gfcis
Electrical panel replacement, breaker replacement
