Our licensed plumber will tap into your main water line at the front of the home and install a brass backflow to code. The constant pressure system is currently set at 72psi while we got slightly better outside and 9 gpm. Our plumber will run left through the thick wall to the stable, move up and out the back approximately 6 feet off the ground with copper that you will cover with mahogany. U=You on site guidance during this process will ensure that it is done to your spec. Stage 1: We will install the backflow outside, run 1.5" poly left to the gravel and cross at a 45 degree angle to the lawn and down to the run entrance. From there we will switch to 1.25" poly that will loop the run. This requires that we dig out the gravel by hand so we can bury the pipe close to the wall. Stage 2: 12 i25 high output heads will be installed on the fence being installed by installing tee's off the poly and installing valves and drains at the bottom of each post, running a clamped riser to the