Arrived at location on 2/7/22 - took apart the water side of the cuber and sanitized each piece then rinsed with potable water and reinstalled, then ran through a descale and sanitation cycle and caught the next drop after sanitation process. brushed each refrigeration condenser then blew out with dry nitrogen as needed filter media was cut and put before each condenser coil. temperatures taken on each piece of equipment and recorded the model and serial numbers. inspected door /drawer gaskets also door closers and hinges. inspected and performed PM on the convection oven on the lower level, the chopper and microwave. Returned to location on 2/10/22 - -checked operation of cooking equipment in the kitchen on the hot line , Checked for gas leaks and operating temperatures on the deep fryers. brushed each refrigeration condenser then blew out with dry nitrogen as needed filter media was cut and put before each condenser coil. temperatures taken on each piece of equipment and recor