Tech came out to perform boiler maintenance inspection. Tech tested glycol levels, pump amperage, cleaned condensate trap, checked for error codes,Tested exhaust motors, tested gas pressure, check air separated, check cross connection. Boiler and heating panel working well at this time. System is only 1 year old. Tech came out to perform heating maintenance inspection. Tech tested the heating system: checked gas pressure, temperature, exhaust fan amperage test, blower motor amperage test, flame rectification sensor test, exhaust fan vacuum test and a combustion analysis. Tech performed heating inspection on both systems main floor and second floor. Tech found both systems ignition is starting to fail. This is typical wear and tear as the furnace is 14 years old on both and has never been replaced. Tech found on the main floor furnace. There is two cracks starting to form on the primary heat exchanger. On the second floor furnace, the heat exchanger has no apparent cracks at this