Replaced deteriorated cement crown Windsor Ct and top corbeled edge , due to water damage. Applied commercial grade Aqua Block water repellant to protect the rest of the chimney.
Windsor CT Chimney needed a liner , the previous company couldn’t fit it down around the bend , because they don’t have masons on staff , there’s cases where the only way to get the liner done is to break in. It’s a breeze for Safeside.
In Windsor, CT, We found the crown was completely deteriorated exposing the cored brick allowing water into chimney system. We built a new cement crown covering and installed a chimney cap.
Windsor Ct cracked crown repaired with waterproof crowncoat and installed two stainless steel chimney caps.
In Windsor, CT, existing crown had a spot repair in its past, that was no longer viable to protect the chimney from water entry. We installed a new crown to prevent water entry and to increase the longevity of the chimney. Reinstalled the homeowner's cap.
Need To Setup Around the Top of the Chimney in Windsor CT, Cut Down Top Flue Tiles In Order To Accept A Proper Cap, Then Re-mortar The Entire Top Cement Crown With a Waterproof Cement To Properly Shed Water Thus Keeping the Lower Masonry Structure Protected.
A formerly unused fireplace with interior damage repaired by Heatshield Cerfractory sealant – more economical than a fireplace liner.
Found a cracked crown in Windsor CT. Damage wasn’t at the stage of requiring removal and replacement. Applied crown coat crown seal to prevent further damage and increase the longevity of the chimney.
installation of stainless steel chimney liner system
Chimney rebuild from the roof up including new clay flue tiles , reinstalled customers chimney cap
Found deterioration and cracks throughout fireplace and gap behind tile in chamber. Wasn't damaged enough to warrant complete tile removal and liner installation. Installed high temp heashield throughout smoke chamber and flue liner.
Chimney Liner Installation and clean out door installation
