John Kistler gave me options for how to deal with my low yielding well, which also has bacteria and PFOAs. The system was not cheap but it was necessary and should last a long time. Great service, city water pressure and the system seems to be working properly. I am confident if I have any issues they will come back right away. Thanks guys!
Overall Experience
Quality
Price
Convenience
Frank and Tommy were great to work with when I needed an emergency water tank replacement. They were quick, efficient and very knowledgeable which was much appreciated as a new homeowner still trying to figure of the well and water treatment systems that have been installed. Could not be happier with the outcome and service.
Overall Experience
Quality
Price
Convenience
Excellent work, and great at communicating my options. Both of them were very efficient and made quick work of the problem I had. The final solution with the DAB E.Sybox mini was an outstanding option providing me a much better end result than seperate pump and pressure tank I previously had. Its quieter, far better pressure than before while taking up only 20% of the space I had for the older equipment. Thanks to chris and his team!
Overall Experience
Quality
Price
Convenience
Diagnosed irrigation well for pump not working. The sub drive 150 was flashing 2 red lights which indicates low voltage. The driver has 240v coming into the driver. 0v going out to the pump. The driver needs to be replaced. It is a sub drive 150 The well pump is a 3hp 3phase 230v well pump.
Install a Pioneer dense block carbon system for removal of lead and cyst viruses. Non-backwashing. Install one bypass assembly Reconfigure existing equipment for addition of the new and in proper sequence.
Replace existing Fleck alternating 64,000 grain water softening system with a new Clack 1" Metered and alternating 64K system using Clack WS1 digitally controlled electronic filter valves. Program for correct operation. Reconfigure plumbing to install the new system and dispose of the old. Clack products have a five year manufacturers warranty and our workmanship is warrantied for 90 days.
Replace existing well tank and tank plumbing assembly Remove and dispose of the old well tank Reconfigure equipment sequencing and TBD by technical discussion with our team. re-plumb as required. Complimentary service: Test hardness values of the raw water and program the existing softener we installed accordingly. service softener as required. Including venturi valve and other components. CUSTOMER DOES NOT THINK THE SOFTENER IS WORKING PROPERLY AND THE WATER IS TOO HARD.
Replace 33 gallon well tank with a new WR120 Wellright tank. Use fittings to complete the job and dispose of old well tank. Water tested hard, follow up for service to unit clack ws1.
Install a whole house point of entry Pioneer dense block carbon filtration system.
- Proposal one of two - Replace existing 3 HP submersible well pump with a new Pentex submersible pump. Pump delivery wet end TBD. - Install a PID 30 variable frequency drive - Remove and dispose of old well tank - Reconfigure plumbing as required for installation of a new stainless steel tank T assembly - Install 505' of new #8 10/2 flat jacket wire in the well - Replace 504' of galvanized t/c well pipe with new 1.25" galvanized pipe - Install a new 33 gallon WR120 well tank - Install an electronic transducer pressure regulator - Mud mat to the well head and supply lumber bridging sufficient to bridge culvert
Replace existing water softener with a Clack 48,000 grain water softer using a WS1 control valve with a flow meter.
Change pressure relief valve because it blew off due to the pressure switch nipple was frozen
Installed carbon tank with back washing head
Yeah, there’s a new pump pressure tank
Took pictures of the problem. The hose Spicket going out to the backyard through the foundation wall is bent and he would like us to fix it on Friday. Just give him a good time for us to come back.
Install a twin Metsorb arsenic removal system as manufactured by Clack and using 2 cubic feet of Metsorb. Replace existing 119 Gallon well tank with a new unit and install a new stainless steel tank T assembly. Remove and dispose of old tank Well tank warranty: manufacturers five years. WellRite. Clack filter valves and mineral tanks: manufacturer five years Blue Heron Workmanship: 90 days for deficiencies in workmanship and practically speaking we have a no questions asked return policy for one year.
Replace the existing well pumping system with a Grundfos CU301/SQE constant pressure system - CU301 - 1 HP 230 V 2 wire 10 GPM SQE series pump - Manifold package - WX102 well tank - Transducer Install a GDS 12 gallon per minute UV light system w/ 2 x 10 pre-filter Install a Clack 48,000 grain metered water softener w/by pass valves and brine tank