For this job, the customer was having problems with their dishwasher tripping the breaker. When I arrive at the customers house, the breaker was turned off, so I proceeded to checked for voltage when I’d turned the breaker on. I had gotten 125v and 7.5amps. So I had the dishwasher turned on and it ran for about 10 minute. Then it tripped the breaker. I did checked the wiring underneath the dish washer but I didn’t find any wire damage. I did noticed burnt smell coming from the dishwasher. The washer failed to come back on, and I could not keep the breaker on without getting tripped. My recommendations for the customer is to install a new dishwasher. By time they order a new motor for it. It would be the same price of installing a new one. As of right now, the customer does not have a dishwasher. It is condemned. I did charged a diagnostic fee and if they have us to install a new dishwasher, I told the customer it will go towards that bill.