Larry is friendly and professional. I have confidence that the job was done right.
Overall Experience
Quality
Price
Convenience
Larry was familiar with past services on our furnace, and quickly evaluated the need for a new valve control on our furnace to prevent overheating in one zone. He and his helper did annual maintenance on the furnace. They will be back to change a couple of parts once they are received.
Overall Experience
Quality
Price
Convenience
Overall Experience
Quality
Price
Convenience
Overall Experience
Quality
Price
Convenience
Overall Experience
Quality
Price
Convenience
Ok. Larry Halpin was responsive to questions, efficient in diagnosing the problem, and quickly repaired what was needed to make the Airconditioning system work.
Overall Experience
Quality
Price
Convenience
Great service as usual, technician very respectful and knew what he was doing, very happy with this visit!
Response from X-Treme Temp Heating & Cooling, LLC:
We are so grateful for your 5-star review. Thanks for sharing your rating with us and the community.
Overall Experience
Quality
Price
Convenience
Andrew was personable, informative but most of all he was very capable. When he left I was very confident the boiler was running the best it could.
Overall Experience
Quality
Price
Convenience
Andrew was punctual and polite. He worked efficiently and went the extra mile I. Cleaning up some footprints in the kitchen.
Overall Experience
Quality
Price
Convenience
On time. Reasonable prices. Clean. Polite
Overall Experience
Quality
Price
Convenience
Larry came out quickly and was able to fix our leak from the furnace. He courteous and explained things so I could understand them. Highly recommend Xtreme heating
Overall Experience
Quality
Price
Convenience
Larry was very professional and did a thorough cleaning of our heating system. Very satisfied
Overall Experience
Quality
Price
Convenience
Andrew was courteous, informative and thorough in his repairs and explanations including a follow-up for a leak detected.
Overall Experience
Quality
Price
Convenience
Overall Experience
Quality
Price
Convenience
Response from X-Treme Temp Heating & Cooling, LLC:
Thank you for taking the time to leave such a positive review! We're glad to hear you had a great experience with us.
Overall Experience
Quality
Price
Convenience
Zoned HVAC System Install: The homeowner wanted better comfort control for their multi-story home. I installed zone dampers, ran new low-voltage control wiring, mounted separate thermostats, and connected everything to a central zoning panel. After programming each zone, the home achieved more even temperatures and improved system efficiency.
Heating System Maintenance Boiler: Arrived at the client’s home to perform routine maintenance on the boiler system. Inspected and cleaned the burners, heat exchanger, and combustion chamber, checked all safety controls and pressure gauges, and tested the circulator pump for proper operation. Flushed any sediment buildup and verified proper water pressure and temperature settings. Conducted a full operational test to ensure consistent heat distribution throughout the home. The boiler is clean, running within manufacturer’s specifications, and ready for reliable heating.
Performed a heating pm on an oil boiler. Brushed and vacuumed. Replaced the oil filter, nozzle and strainer. Started and checked the safeties. Performed a combustion test. 6.9% o2, 17 ppm, 82.5% efficient System is operating properly.
Valved system off and drained some water from the boiler. Removed and installed a new circulator pump with a flow check in it and installed a new top for the Hi-vent. Filled and purged. Started and checked the operation.
Performed a heating pm on an oil boiler. Brushed and vacuumed. Replaced the oil filter, nozzle and strainer. Started and checked the safeties. Performed a combustion test. 7.3% o2, 27 ppm, 85.4% efficient System is operating properly.
Performed a heating pm on an oil boiler. Brushed and vacuumed. Replaced the oil filter, nozzle and strainer. Started and checked the safeties. Performed a combustion test. 3.4% o2, 28 ppm, 85.5% efficient System is operating properly. The upstream bedroom zone is heating due to the flowcheck inside the circulator is not closing fully allowing some water to go through the zone when it is not calling. Recommend replacing the circulator and Hi-vent on the air scoop. We will have the office schedule the replacement.
Performed pm on oil furnace Brushed and vacuumed flue pipe and heat exchanger Replaced oil filter, nozzle, and strainer Checked all electrical connections and safeties Performed combustion and smoke tests
Brushed and vacuumed flue pipe and heat exchanger Replaced oil filter, nozzle, and strainer Checked all electrical connections and safeties Performed combustion and smoke tests Recommend getting oil sludge additive for the oil tank.
Customer turned the first floor thermostat on. Checked the boiler, did not hear the circulator turn on. Checked for power. Had 127 volts at the aquastat and at the circulator but it’s not turning on. The circulator is bad and needs to be replaced. Customer would like to replace the first floor thermostat also. While working on the circulator, noticed that the extrol tank was full. Recommended replacing while the system is draining. Drained the system and replaced the circulator and extrol tank. Filled the system and purged. Removed the thermostat and installed a Honeywell T4 thermostat. Started and tested.
Performed a heating pm on an oil furnace. Brushed and vacuumed. Replaced the oil filter, nozzle and strainer. Replaced the air filter, customer supplied. Started and checked the safeties. Performed a combustion test. System is operating properly.
Furnace and Water Heater Maintenance- Performed preventative maintenance on an oil furnace and oil hot water heater. Brushed and vacuumed. Replaced the oil filter, nozzles and strainers. Started and checked the safeties. Performed a combustion test. System is operating properly. Recommend replacing the anode rods in the water heater
HVAC Maintenance- Brushed and vacuumed flue pipe and heat exchanger Replaced oil filter, nozzle, and strainer Checked all electrical connections and safeties Performed combustion and smoke tests 8.2%o2 5ppm co 0 smoke While performing the maintenance we found the there is debris in the chimney that is close to level with the flue pipe entrance. Recommend having the chimney cleaned before the debris fully blocks the flue pipe entrance.
Performed 2 ac pms Visually inspected indoor evap coil and blower compartment Checked all electrical connections and safeties Checked volts and amps Visually inspected air filter Replaced both filters with customer supplied Rinsed condenser coil Blew out drain line and poured water to ensure properly draining Tested condensate pump Checked refrigerant levels Checked capacitor Took temps While performing the maintenance we found the customer had the second floor system replaced since the last maintenance. We found the refrigerant line connections were made with silver solder instead of braze. Manufacturers say in the install manual not to use silver solder since it is not rated for higher pressure refrigerants. Also found the second floor unit was low on refrigerant. The manufacturer calls for 10*sub and the u it was only at 2.5*. After getting customer authorization we added 11oz R410A to the system bringing the subcooling up to 13*. Unit is working properly
Performed 2 ac pms Visually inspected indoor evap coil and blower compartment Checked all electrical connections and safeties Checked volts and amps Visually inspected air filter Rinsed condenser coil Blew out drain line and poured water to ensure properly draining Tested condensate pump Checked refrigerant levels Checked capacitor Took temps Both units are working great
Performed an A/C pm. Blew out the drain line, checked the air filter. Checked and tested the condensate pump. Rinsed the condenser. Checked the electrical connections, checked the pressures and temps. System is operating properly.