Performed condenser coil cleaning on a system that was short cycling last season. The coil was covered in cottonwood and dust buildup. After a thorough rinse and cleaning, compressor pressures stabilized, and discharge temperature returned to normal range. Clean coils make a huge difference, especially as summer approaches.
Swapped out an old mercury thermostat for a smart programmable model. The homeowner needed control from their phone and also wanted to set temperature limits for guests. I configured Wi-Fi access and confirmed correct staging for their dual-fuel system. Tested heat and cool cycles—both are operating as expected.
Just completed an oil furnace repair in Higganum, CT. The burner motor was malfunctioning, hindering ignition. I replaced the faulty motor and ensured proper calibration. Now, warmth returns to the home efficiently. Providing reliable heating solutions to keep families comfortable through the chill.
Upon arrival unit was on. Customer stated the breaker was tripping intermittently causing the condenser to stop running. Upon inspection found multiple high and low voltage wires chewed up and touching metal. Also found the contactor was corroded and starting to pit. Repaired all chewed wires and replaced the contactor. Started unit and checked refrigerant. Unit is operating properly.