Convert old jet pump to a submersible pump. Locate and raise well casing in back yard. Install new well tank and remove old tank. Install a 10s05 pump in well along with a new pitiless. Jet Pump to submersible pump conversion - Locate and excavate wellhead. Most excavations are ~3 to 4 feet deep and in rare instances deeper. As work is progressing, we will inform of any issues in this regard and any additional costs. - Raise by adding a welded pipe extension to the 6" steel wellhead casing. For purposes of this estimate 4' to 6' steel casing is added and subject to change. Casing is billed on a linear foot basis. - Install a pitless adapter and vermin proof health department approved well cap. - Install a 1/2HP 2W 230V submersible well pump. For purposes of this estimate we are assuming a pump set depth of 100' and the pipe and wire length may vary. Both are billed on a linear foot basis. - Install a 33 gallon well tank with all associated fittings. - Remove all old equipme
Install water tank and iron breaker in new Britain