Great job by Chris and his partner. Showed up on time and were done before I knew it. Lets hope this tank last as long as the other. Greatly appreciate the service.
Water Test checked equipment said may be interested in a softener
Looked at system to see if it was hooked up in correctly. System is installed correctly took water samples.
Install a resin based PFOS reduction system in two tanks as required for space constraints. One cubic foot of HP 110 resin installed in equal amounts in two tanks with Clack valves and bypass valves. This is a non backwashing system. Install an 8 GPM GDS UV sterilization light with a 2 x 10 pre-filter
Replace existing softener with a new metered 48,000 grain Clack water softener w/bypass valves, programed WS1 filter valve and JG fittings. Clack products have a five-year warranty. Remove and dispose of the old system Perform a Basic water analysis (pick up fee waived with new installation)
Take Resin Tech BH2 and PFAS water test.
Place a PA One Call. Excavate sufficiently at the wellhead to locate and repair a broken lateral line pipe. Note: The pitless adapter may be broken and it cannot be determined until the hole is dug and the leak is identified. Provide labor, excavation machine and materials to repair the leak.
Replace well tank and spin down filter