SERVICE UPGRADE- 1) Remove 125 amp main lug indoor circuit panel. 2) Replace with new 200 amp main lug indoor 20/40 circuit panel. 3) Label, rough patch and clean. 4) Remove 100 amp meter can. 5) Replace with 200 amp meter/main combo 8/16 feed thru circuit panel. 6) Run approximately 60 ft of 2 inch pvc conduit from meter main combo to indoor circuit panel. 7) Pull 3 runs of #2/0 gauge copper feeders(approximately 180ft total) and 1 #6 gauge ground throughout conduit. 8) Update grounding system: install 2 ground rods, 1 water pipe ground, 1 low voltage ground bridge interconnected with #4 gauge solid bare copper wire. 9) Pull permit and get inspection. POOL TRANSFORMER/SWITCH BOX 1) Install customer supplied pool light transformer. 2) Remove exisitng pool light switch box. 3) Cut conduits shorter and reinstall new box and switch so that box is below hurricane shutters.