Overall Experience
Quality
Price
Convenience
Response from Garner Heating & Air Conditioning Inc:
We’re so glad you had a good experience.
Overall Experience
Quality
Price
Convenience
Response from Garner Heating & Air Conditioning Inc:
Thank you so much for taking the time to leave us this amazing review!
Overall Experience
Quality
Price
Convenience
Indoor Air Purification Installation Service: To enhance indoor air quality, I expertly integrated a UV light air purification system into the client’s HVAC setup. With precise installation and optimal placement, the system effectively neutralizes airborne contaminants, fostering a healthier indoor environment.
Heating System Repairs: A residential heating system was producing insufficient warmth due to a dirty burner assembly. I meticulously cleaned the assembly, removing debris buildup that was affecting combustion efficiency. This service significantly improved the system’s heating output, ensuring steady and reliable warmth.
Installed Carrier 3.5-ton heat pump system. Installed Ecobee thermostat. Replaced secondary drain pan. Installed new supply and return plenums. Replaced satellite plenum with metal wyes. Sealed all connections with mastic air lock. Rebuilt primary drain line and cleared to ensure proper operation. Replaced disconnect and whip at outdoor condenser. Re-insulated the suction line and ran low voltage in 1/2 inch Seal-Tite. Pressure tested line set and pulled a vacuum. Weighed in additional refrigerant to meet manufacturer specifications.
Heating System Installation: A homeowner needed a reliable heating solution for their home. I installed a high-efficiency heating system, ensuring consistent warmth and energy-efficient performance. This upgrade provides the homeowner with a comfortable indoor environment throughout the colder months.
Indoor Air Purifier Installation: To address a homeowner's concerns about poor indoor air quality, we installed a high-efficiency indoor air purifier. The unit was expertly positioned for maximum filtration, eliminating contaminants and allergens. This installation significantly improved the home’s air quality, ensuring a healthier environment.
Ductless Heat Pump Installation: A client sought an efficient heating and cooling solution without extensive ductwork. We installed a modern ductless heat pump system, offering customized temperature control for multiple zones. This tailored approach improved comfort and energy efficiency, meeting the client’s unique requirements.
Furnace Replacement: A homeowner with an outdated furnace experienced frequent cycling and poor heating performance. Our inspection showed that the heat exchanger had cracked, making replacement necessary. We installed a high-efficiency furnace with advanced safety features. The new system provides reliable warmth and increased energy efficiency.
Ductwork Inspection and Repair: Upon performing a ductwork inspection, I identified significant dust and debris buildup inside the ducts, restricting airflow. I conducted a thorough duct cleaning and sealed gaps to optimize the system's efficiency, ensuring that the HVAC system worked at peak performance as autumn weather set in.
Heat Pump Repair: Called out to a home with insufficient heating from the heat pump, I located a refrigerant line leak. After repairing the leak, the system’s heating capabilities were fully restored, ensuring the homeowner would have reliable warmth throughout the cooler autumn season.
HVAC System Repairs: Adjusted thermostat settings and replaced air filters to resolve frequent short cycling and maximize system performance.
Air Conditioning System Repair: Replaced a malfunctioning compressor to prevent circuit breaker trips and ensure efficient AC operation.
Performed cooling maintenance on one heat pump system. Checked all electrical, mechanical and performance of the system. Cleared and treated the drain line and washed the outdoor coil. I found that the system is slightly low on R-22 refrigerant, the evaporator coil has a leak on it, the secondary pan is rusted and in bad shape and the blower wheel is dirty. At the condenser the starter is burnt and pitted at the contacts and the fan motor is leaking lubricant. No other major issues were found, and the system is operational at this time.
Installed new Carrier 5-ton heat pump system. Installed new Honeywell T6 Pro thermostat. Rebuilt and insulated condensate drain line. Added SS2 and SS3 safety float switches. Replaced secondary drain pan. Installed new filter dryer, pressure tested with dry nitrogen and pulled a vacuum on the copper line set. Replaced supply plenum and sealed with mastic airlock. Replaced the filter base on the air handler. Replaced the disconnect and pad for the condenser. Charged system to factory spec. System is working properly at time of departure.
Performed semiannual maintenance on the AC system. Inspected the Performance, Mechanical and Safety Systems. Verified system was operating within manufacture’s specifications for operation. Did find the refrigerant charge of the system to be low and did recommend a refrigerant recharge to manufacture’s specs but the customer declined at this time.
When I arrived, I found the water removal system to be completely clogged on both the primary and secondary drain lines. I gave the customer his options and he chose to have it cleared at the basic level. After clearing the water removal systems everything is draining at this time. The secondary pan still has a little water in it with the Viper cleaner to treat the algae but will evaporate over the next couple of days. The customer informed me that he will call us in the next month or two to sign up for Maintenance plan to prevent this from happening in the future.