Today I arrived on site and completed the following: **System Overview** * Confirmed the overall equipment condition is good. * Verified the indoor unit is an air handler located in the closet, servicing the whole home. * Confirmed the outdoor unit is a heat pump located on the side of the house. **Component Inspection & Testing** * Checked the pleated 1" filter; the customer has spares and will replace it themselves. * Observed the indoor coil is in fair condition. * Confirmed the outdoor coil is in good, clean condition. * Tested and inspected the blower motor, condenser fan motor, compressor, blower run capacitor, compressor run capacitor, fan run capacitor, heat strip kit, electrical wiring, defrost control board, and contactor; all are working properly within manufacturer's specifications. * Inspected the blower wheel, ductwork, electrical wires, and primary drain pan; all are in good condition and working properly. **Measurements & Adjustments** * Recorded