Today I arrived on site and performed a summer time maintenance on your HVAC equipment. **Air Handler (Indoor Unit):** * Located in the crawl space. * Cleaned the indoor coil, which was in fair condition. * Replaced the air filters (customer provided spares). * Existing filter sizes were 20x25x5 and 18x24x1. * Replaced pleated 1" filter. * Washed washable filter. * Inspected the blower wheel, secondary drain pan, primary drain pan, electrical wires, and ductwork; all were in good condition. **Heat Pump (Outdoor Unit):** * Located on the side of the house. * Cleaned the outdoor coil, which was in fair condition. * Tested the blower motor, compressor, condenser fan motor, blower run capacitor, compressor run capacitor, fan run capacitor, contactor, and electrical wiring; all operating within specifications. **System Checks:** * Cleared the condensate drain line. * Cleaned out the primary and secondary drain pans. * Tested the safety switch. *