Warranty Evaporator Coil Furnish and Install Warranty Evaporator Coil Furnish and Install Liquid Line Filter Drier Recover Refrigerant Cut/Braze Copper Lines Add/Adjust Refrigerant Perform Start Up Procedures 6-23-25 NM Arrived onsite to help Caleb install the new evap coil. Had to put new screws into the attic access to hold the panel. Brazed with nitrogen, filter drier was in outdoor unit so did not need to be replaced. Mounted sensing bulb properly and insulated. Pressure tested at 250 for 15 minutes. Checked with Stuart to make sure we were good with pressures. Temp split 20 degrees at this time. Microns down to 180 microns. Confirmed with Stuart that unit was working properly.