Customer concerned about unit not cooling properly. Checked blower motor operation and inspected equipment cabinet. Checked thermostat calibration and filter location. Checked outside condenser unit. Located wire that is burnt out and needs new hand start kit. Customer has approved for repairs Repaired wires in the condenser unit and relay the hard start kit. Unit is cooling well and drains properly. Performed preventative maintenance tune up. Checked blower motor operation and inspected equipment cabinet. Cleaned and vacuumed drain pan and drain line. Flushed drain line with water and primed drain line. Cleaned and rinsed condenser coil and compressor deck. Checked refrigerant levels and check test start up components. Recommend to have pure AirX germicidal uvc light bulb replacement due to age components. Customer has approved for repairs and new germicidal uvc light bulb. Thank you for choosing total air.