Arrived on site, homeowner notified me that water was coming out of the emergency drain lines on both sides of the house. Upon further inspection, I found that the drain lines were tied together draining in the upstairs bathroom. I removed the pvc that tied the drain line into the sink and replaced it with plastic tubing. We then installed blowout valves on both sides of the pipe so that we could isolate the drain. I proceeded to blowout the drain line and removed a substantial amount of sediment and algae. I then flushed and blew out the drain line repeatedly until the drain began to drain normally. We then installed and wired float switches to both units and tested them to make sure they were functioning properly. Tested extensively with additional water to ensure both sides are draining well and found them to be. We then proceeded to perform the maintenance. 1. Visually inspected condenser coil for debris/ dirty. 2. Inspected condenser fan motor. 3. Inspected condenser fan blades.
