Today I arrived on site and performed the following maintenance and inspection tasks: **Indoor Unit (Air Handler):** * Located in the crawl space. * Observed the overall condition as fair. * Verified the pleated 20x25x5 filter was checked. * Noted the indoor coil condition as fair and clean. **Outdoor Unit (Heat Pump):** * Located on the side of the house. * Observed the outdoor coil condition as fair and clean. * Cleaned the outdoor coil. **Electrical Components (Working Properly):** * Verified proper operation and amperage of the blower motor, condenser fan motor, compressor, compressor run capacitor, fan run capacitor, contactor, and electrical wiring. **System Components (Good Condition):** * Confirmed the blower wheel, primary drain pan, and electrical wires were secured and in good working order. **Temperature Readings:** * Measured a return air temperature of 76.0 degrees Fahrenheit. * Measured a supply air temperature of 56.0 degrees Fahrenheit.