Replace service panel Completed WPQ. We drilled through the concrete pad and set the ground rods, and ran a #4 ground wire from the rods to the panel. We bonded the hot/cold and gas line at water heater. We ran a #4 ground wire from the panel to the main water shutoff. We installed a new weatherhead and service cable from BGEs’ connection point to the meter can. We ran new service cable from the meter can to the new service disconnect. We then ran new service cable from the disconnect into the new 30 space 200 amp QO Panel, complete with new breakers and surge protection to current county safety codes. We will reach back out shortly to confirm a county inspection date.