Very good walk-thru of items to be done and the electrician did go over their estimate to do the items requested before he left. But still haven't received my written estimate via email as I requested.
Great communication in arranging appointment and during appointment
Nick was amazing. Our issue was very simple to resolve, but he took the time to explain everything to me, kindly and thoroughly. He was very respectful of my home, and my lack of knowledge. I will definitely use this business for future electrical needs, and highly recommend them to others.
The task Matt tackled for us was spread out over four long (for him) days, and he was prompt every day. Matt was very professional and his work ethic is beyond reproach. The work involved relocating a breaker panel, and running a new supply line on the outside of the house.. What I was most impressed by, though, was the fact that out of four electrical contractors we asked for prices, Matt/Haas and Sons was the only one who didn't balk when we asked for a permit to be pulled for the job. I would absolutely recommend Haas and Matt for any electrical work you need to have performed.
Alex was a pleasure to have in my home and very professional in the work he was doing. He was efficient and got a lot of work done in a short amount of time.
Would definitely recommend. Diagnostic skills were excellent and corrected the problem very efficiently and provided clear explanations as to what was the problem.
Nick was outstanding, diagnosed problem quickly; explained the source, the solution and cost up front; and finished the job expertly! 5 STAR work!!!
Very easy to contact. Michael was amazingly efficient, neat and clean. He is extremely knowledgeable, trustworthy, pleasant and a pleasure to work with,
The technician Michael was knowledgeable, friendly and very personable. He kept me informed each step of the way about what needed to be done. If I have any future electrical work to be done I will definitely be contacting Haas & sons.
Great professioanl service. Alex, the technican, is an expert and provided outstanding work. If I have electrical need again, I will definitely use them again.
Very friendly, quick service, explained everything, did not perform unnecessary repairs
Today’s visit was for annual maintenance inspection. I saw a few things of note that needed to be corrected. Please see below for work performed. Also, see attached estimate if you choose to move forward with dedicated circuit for treadmill. Replace breakers for two pole breakers Replace flood light on back deck Bond water heater Replace exterior receptacles
Provided pricing for customer to complete several different tasks around Home.
The reason for today’s visit with customer was a continuously tripping breaker for the garage/outdoor plugs. After arriving i was taken to the garage where i saw a 200 amp Homeline panel installed in 02. The panel had multiple shared neutrals/double taps/ and a shared circuit. After inspecting the panel, i checked the integrity of the exterior outlets where i saw both had water damage/Mulberry flapper style covers that was allowing moisture to set in. After inspecting the outlets i began assessing why the breaker was tripping with the mower. The mower was an electric 12 amp plug in style mower. I plugged it into the garage then into the living room outlets and saw it was still causing a trip. I then plugged it into the washer outlet which was a 20 amp circuit and it caused a trip there as well. After seeing the washer outlet i recommended on GFCI protection due to device being within 6 ft of water. After testing the mower in multiple locations and testing the circuits i made my recomme
This solution includes the installation of 2 customer supplied 50A receptacles. We have installed 2 new customer supplied EV rated 240V 50A receptacles in the garage.
I tapped out of the switch in the attic then ran a wire up and supported it on the joists then installed a single gang new work box and a tamper resistant receptacle. Then i set the template on the roof and cut out a hole for a attic fan then I pulled up the shingles and slide the new attic fan into place then installed screws and roofing tar to seal up any water from getting into the attic. This is a cool breeze smart fan.
Todays visit was for partial power losss in basement. Turned out to be a burnt up neutral in a keyless fixture in laundry area. Devices in home are original and should be replaced however we only replaced devices on affected circuit which also included sump pump we discovered later. To avoid issue from happening again, we performed the below: Replace all devices on affected circuit. Thank you for your business!
Replace current lighting fixture above dining room table. Light will be replaced with chandelier and current box installed is a fan/fixture box.
We have delivered pricing regarding the dedicated 240V 50A circuit for new range. This solution includes the installation of a 240V 50A circuit to terminate into a receptacle. We have installed the new range circuit and receptacle.
Today’s visit was for attic fan replacement. While doing my assessment, I also saw there was no receptacle in the attic and multi wire branch circuits on single pole breakers. Please below for work performed: Replace customer supplied attic fan Install receptacle in attic for servicing purposes Install two pole breakers for multi branch circuits Good luck on your move to Myrtle Beach!
We will run a new dedicated 20 a.m. circuit along the sidewall from the main panel over to the treadmill location. We went I need dedicated receptacle in which we will pipe down the concrete wall behind the insulation.
Today’s visit was for ceiling fan install. Box needed replacing as it was hanging out of the wall and of course installing the ceiling fan. Below work performed: Replace ceiling fan and brace box
Installation of new ceiling fan fixtures located in each of the four bedrooms on the second floor. Installation of a ceiling fan for a 4 seasons porch located on the rear of home. Installation of a new LED customer supplied dimmer for the can lights in the living room. Customer had one ceiling fan that was broken in box, could not install. Will return for a follow up visit when he receives it at no charge.
Today’s visit was for EV charger install. Customer would also like ceiling fans and vanity light replaced as well. Please see options for all the above as well as an option with surge protection
Today’s visit was for light replacement and breaker not resetting. During assessment I saw panel was a Westinghouse from 1992. It was the breaker that would not reset. I recommend replacing the panel soon. This will continue to happen. Please see solution to get that resolved for you. Work performed today: Replace (2) 15 amp breakers Replace (1) 4’ vanity light Replace (2) customer supplied toggle switches
Was called out for ceiling fan flickering. Turns out the ceiling fan was going bad and would no longer work with dimmer. To get ceiling fan wiring, I replace fan switch with two single pole switches. I recommend replacing the ceiling fan at your earliest convenience. See estimate to replace smoke detectors throughout home.