403 Headquarters Dr. Unit 5
Millersville, MD 21108
(443) 396-3797

Local Reviews
for laurel, md

Rated 5.0 out of 5 stars based on 28 customer reviews

Excellent Service

Alex, the electrician, was very knowledgeable, polite, friendly, and professional. He did his work quickly and efficiently, and answered all my questions.

  • Overall Experience
  • Quality
  • Price
  • Convenience

Service was outstanding

Alex did at excellent job explaining what he was doing and went over everything after he was finished also left the area he was working in the way he found very clean

  • Overall Experience
  • Quality
  • Price
  • Convenience

Great service from Alex

Haas and Sons responded quickly to my service request. Alex Weber did an exceptional job getting all of the work done.

  • Overall Experience
  • Quality
  • Price
  • Convenience

Great Service!

Alex ireplaced my deck lights which included removing the old wiring, lights and transformers as well as installing the new components. He was on time for the appointment. As always, his work was precise, neat, and thorough. After the installation he answered questions from me and my wife.

  • Overall Experience
  • Quality
  • Price
  • Convenience

Friendly and awesome service

  • Overall Experience
  • Quality
  • Price
  • Convenience

Outstanding Experience

My experience was phenomenal.. it was an old school customer service, at its best type of experience.. my garage doors won’t open and my electrical circuit keeps keep tripping and turning off my appliances in the basement. I searched The Howard County Best Pick Reports 2022 and looked for an electrician, it was a little after 5 PM. I read all the companies reviews and began to call based on what I read on quality and timeliness. My first two calls went directly to voicemail message, my third call went to Haas and Sons Electric Inc. A polite and professional young lady answered the phone, took my information and promised a call back in the morning. Next morning I check my phone and I received a voicemail from a young lady named Krysta, she gave me clear instructions to call her back, when I did she answered on the second ring! She was extremely helpful, knowledgeable, professional and most importantly friendly! She told me when to expect the technician “Nick” and he arrived exactly in that time frame with a text letting me know he was 15 minutes away! Once he arrived Nick was absolutely professional, knowledgeable, patient with my questions and fixed both of my issues within an hour!! Ladies & Gentlemen, I have found my new electrician for the next 10 years!! Thank you so much Krysta & Nick , lunch on me!!! A very Satisfied Customer

  • Overall Experience
  • Quality
  • Price
  • Convenience

Great job! Very professional and knowledgeable.

Thanks for doing a great job!

  • Overall Experience
  • Quality
  • Price
  • Convenience

Great service

Matt was very professional. After I explained where I wanted my front house lights to go he completed the job and cleaned up after himself. Great job!

  • Overall Experience
  • Quality
  • Price
  • Convenience

Great Service!

Haas & Sons has done great work for us. We might have been able to get a slightly cheaper price but for the quality of work that was done, the honesty, and the care that was shown, Haas & Sons was worth every penny.

  • Overall Experience
  • Quality
  • Price
  • Convenience

Happy

I had quite a bit of work that was needed but not urgent. These people came out to give me an estimate. They were out and changed my panel and I had work done in every room in the house and outside. They did the work in less than two days. The people worked, were friendly, and kept the place clean. No problems and I was very happy with our decision.

  • Overall Experience
  • Quality
  • Price
  • Convenience

Same hour service! Superb work.

Was expecting an appointment a day or so out from my call but a workman came by within the hour as he had just finished a nearby job. Friendly, fast and efficient.

  • Overall Experience
  • Quality
  • Price
  • Convenience

New circuit and installation of over-range microwave oven

The work was done back in September; I like to wait a bit to see how things are going before reviewing. Our new over-range microwave oven is working great. We are very pleased with the quality of the work and the result. The new circuit had to be run through our finished basement, up into the kitchen, and the work was done carefully and with minimal disruption. There was a minor follow-up issue with the installation of the microwave, but Alex promptly took care of it. I highly recommend Haas and Sons.

  • Overall Experience
  • Quality
  • Price
  • Convenience

Great service

Courteous, fast and helpful!

  • Overall Experience
  • Quality
  • Price
  • Convenience

Great Service

  • Overall Experience
  • Quality
  • Price
  • Convenience

Great

Very nice gentleman. Excellent job

  • Overall Experience
  • Quality
  • Price
  • Convenience

Job Locations
for laurel, md

Matt M.

Matt M. Job Checkin

To prevent failure of the electrical system of the home we will replace the smoke detectors located on each level of the home with smoke/co combo units and install smoke detector in each bedroom. We will replace loose/broken receptacles with new receptacles in the bedrooms, bathrooms, upstairs hallway, dining room, living room, family room, and kitchen to ensure no loose or worn receptacles can cause damage to the home or what is plugged into them. Also we will replace the gfci in the kitchen with a new receptacle with gfci protection. We will also repair the double tapped neutrals in the panel to ensure no loose connections can occur in the electrical panel.


Michael W.

Michael W. Job Checkin

We have provided pricing for the bath fan motor replacements.


Alex W.

Alex W. Job Checkin

I installed a ultra whole home surge protector to protect the homes electronics plugged in throughout the home and also all the utilities throughout the home from potential power surges. I installed a 2 pole 40 amp breaker I separated all the grounds and neutrals on the ground bar so each neutral is not under its own screw and grounds were under their own screws I removed and replaced a damaged 15 amp single pole breaker I bonded the home at the water heater from the cold side to the hot side to the gas pipe I ran a jumper from the top of the water meter to below the water meter I removed and replaced 3 hard wired interconnected carbon monoxide smoke detector combos with 10 year lithium battery’s Customer is now a VIP member #review


Alex W.

Alex W. Job Checkin

i removed and replaced all devices on the bathroom circuit including all switches, gfcis, and the gfci outside I re spliced all the wires in the boxes so that the gfcis were line sided so one location would not affect other areas in the circuit. I also did this so that if the gfci trips the customer will still have light in the bathrooms The outside outlet box was falling out the wall due to poor installation so i removed it and installed a old work box then a extension weather proof ring and installed a weather resistant gfci with a new in use bubble cover Customer has a 1 year warranty #review


Alex W.

Alex W. Job Checkin

Customer was told they needed to change electrical panel in condo due to the fact it is a federal pacific panel. These panels have been proven to be extremely dangerous. This estimate includes removing existing federal pacific electrical sub panel Installing a new square d qo electrical sub panel Installing new electrical breakers properly sized Separating the grounds and neutrals due to the fact it is a sub panel Labeling electrical panel so the customer knows what breakers control what throughout the home Permit Inspection January 18th 2023 I removed the federal pacific sub panel for the home I installed a 200 amp main lug 30 space square d QO electrical sub panel I installed new standard properly sized breakers I separated all the grounds and neutrals I installed ground bars in the panel for all the grounds I then labeled the electrical panel I also removed and replaced a receptacle in the spare bedroom that was burnt up due to back stabbed outlets This comes with a 1 year


Nicholas T.

Nicholas T. Job Checkin

Installation of 50 amp 240 volt circuit next to panel Surge protection Reason for today’s visit was to install a customer supplied level two wall charger in the garage near the main panel. We ran a new dedicated 50 amp 240 volt circuit and installed a new 50 CH series breaker for the new charger. We mounted the charger roughly 3 feet to the right of the existing main panel. Circuit was ran in flexible piping from the panel to the new charger. I’m checking the panel we noticed there was no surge protection inside or out. We installed a new ultra whole home surge protector in the bottom of the panel to protect new charger, car and homes electrical system. #review


Alex W.

Alex W. Job Checkin

In the dinning room above kitchen i removed a ceiling fan. And installed a customer supplied chandelier. I also removed and replaced a single pole light switch in the basement living room area with a company supplied single pole switch #review


Matt M.

Matt M. Job Checkin

Customer service call for microwave


Alex W.

Alex W. Job Checkin

I removed a wall scones outside above the garage door and I replaced it with a customer supplied ring camera security light I also went into the two gang switch in the garage when you first walk in to the left-hand side and I were removed the switch controlling the light outside above the garage and I bypassed switch connecting the switch leg in the hot so the security light had constant power #review


Alex W.

Alex W. Job Checkin

i removed a 150 amp federal pacific sub panel in customer's home I installed a 200 amp square d qo main lug electrical subpanel I installed all new standard breakers and properly sized the breakers to the wires including installing 2 pole breakers on multi-feed circuits I labeled the electrical panel Put the pieces of drywall back up that I cut out the customer was aware they were responsible to patch and paint the damaged wall ( can not paint over panel cover) I installed a whole home surge protector I removed and replaced the smoke detector with a carbon monoxide smoke detector combo I removed a ceiling fan in the dining room so the customer can take it to a store and have it repaired Installed a blank plate where the fan was Also removed the dimmer switch that was controlling the fan and installed a single pole light switch The customer has a 1-year warranty


Matt M.

Matt M. Job Checkin

Install a level 2 charge point EV charger. Run new dedicated circuit for level 2 charge point EV charger. Install new 60amp breaker to supply power to EV charger.


Alex W.

Alex W. Job Checkin

I removed a federal pacific 150 amp sub panel and replaced it with a square d QO 150 amp (200 amp rated) with new standard breakers Installed a whole home surge protector I also labeled electrical panel Will return to redeivce the home on December 21st at 8 am Customer has a 1 year warranty on all work preformed December 21st 2022 I removed all the devices in the home and installed new devices I installed new switches, new tamper resistant receptacles and new tamper resistant gfcis in locations required I spliced all the appropriate wires together and pigtail off the spices then hooked the copper wire around the screws to the devices clamp it down and tightened it this ensures the best and safest possible connection throughout the circuit in the home


Alex W.

Alex W. Job Checkin

I removed and replaced a customer supplied light in master bedroom I also removed and replaced a single pole light switch with a dimmer switch 30 day warranty


Michael W.

Michael W. Job Checkin

We have installed a new exterior receptacle on front of home. We recommend that the double tapped neutral wiring and double tapped breaker in the main panel be repaired.


Michael W.

Michael W. Job Checkin

We have installed a new 30A Homeline breaker in the panel. In addition we have cut out damaged portion of #10awg wire. Lastly we tested dryer operation for approximately 10-15min and highest amperage recorded was 27A when initially the heater and motor start. Dryer when in use stays between 17A and 24A.