Arrived on site homeowner stated rooms far away from the unit were not getting enough air and room close to the unit were getting too much. Discussed damper installation to better control airflow. Homeowner is not interested at this time and I gave some recommendation on partially closing some of the vents to push more air to the back of the house. Bubble tested all service ports on condenser and was unable to find the leak from last time. 1. Visually inspected condenser coil for debris/ dirty. 2. Inspected condenser fan motor. 3. Inspected condenser fan blades. 4. Inspected/ cleaned wiring connections. 5. Tested compressor/ condenser fan motor capacitor. 6. Checked compressor amp draw. 7. Checked condenser fan motor amp draw. 8. Inspected / replaced return filter. 9. Inspected return plenum for debris/ dirty. 10. Inspected evaporator coil. 11. Inspected blower motor/ blower wheel. 12. Checked blower amp draw. 13. Measured temperature differential from supply to return. 20 degrees mea
