Today I arrived on site and performed a summer tune-up on the system. Here’s a summary of the work completed: * **Filtration:** * Checked the 20x20x4 pleated filter in the air handler located in the attic. * Replaced the filter using the customer's spare. * **Indoor Unit (Air Handler):** * Confirmed the indoor coil was clean and in good condition. * **Outdoor Unit (Heat Pump):** * Verified the outdoor coil was clean and in good condition. * **Electrical Components (Tested and Working):** * Verified proper operation and amperage of the blower motor, condenser fan motor, and compressor. * Confirmed the blower run capacitor, compressor run capacitor, fan run capacitor, contactor, and defrost control board were functioning within specifications. * Confirmed electrical wiring was working properly. * **Components Inspected (Good Condition):** * Confirmed the blower wheel, ductwork, and electrical wires were secured and in good co