Haas & Sons Electric Inc.

403 Headquarters Dr. Unit 5
Millersville, MD 21108
(443) 396-3797

Our Top Cities

Job Locations
for glenwood, md

Map of Glenwood MD
Dennis S.

Dennis S.


Job Checkin

For today’s visit was for recess lights in 2 rooms, the office and the downstairs bedroom. We also checked the panel and found a lack of surge protection and 1 arc fault breaker that was going bad, so we replaced that and installed a surge vortex in the panel on a BR 50 amp breaker. The downstairs bedroom we installed 4 - 6 inch recess lights with a cassetta smart switches. Then we started work in the office and cut 3 recess holes, but they had LVL joists where 2 of our recess lights were. So they couldn’t fit, even if we did 6 inch recess lights. The only way to make it work were to make the 2 recess lights offset closer to the middle of the room, which would give the fan a strobe effect and not look good. We discussed to the customer and decided not to do the work in the office, so we put the drywall patches back, and took the money off the ticket.

Near Callaway Ct, Glenwood, MD 21738
For today’s visit was for recess lights in 2 rooms, the office and the downstairs bedroom. We also checked the panel and found a lack of surge protection and 1 arc fault breaker that was going bad, so we replaced that and installed a surge vortex in the panel on a BR 50 amp breaker. The downstairs bedroom we installed 4 - 6 inch recess lights with a cassetta smart switches. Then we started work in the office and cut 3 recess holes, but they had LVL joists where 2 of our recess lights were. So they couldn’t fit, even if we did 6 inch recess lights. The only way to make it work were to make the 2 recess lights offset closer to the middle of the room, which would give the fan a strobe effect and not look good. We discussed to the customer and decided not to do the work in the office, so we put the drywall patches back, and took the money off the ticket. For today’s visit was for recess lights in 2 rooms, the office and the downstairs bedroom. We also checked the panel and found a lack of surge protection and 1 arc fault breaker that was going bad, so we replaced that and installed a surge vortex in the panel on a BR 50 amp breaker. The downstairs bedroom we installed 4 - 6 inch recess lights with a cassetta smart switches. Then we started work in the office and cut 3 recess holes, but they had LVL joists where 2 of our recess lights were. So they couldn’t fit, even if we did 6 inch recess lights. The only way to make it work were to make the 2 recess lights offset closer to the middle of the room, which would give the fan a strobe effect and not look good. We discussed to the customer and decided not to do the work in the office, so we put the drywall patches back, and took the money off the ticket.