Upon arrival customer had a dishwasher, sink, and a faucet they wanted installed. They also needed to kitchen sink replumbed and needed their kitchen faucet water lines replaced, they needed two leaking gate valves replaced, along with the installation of two dedicated shutoffs for the kitchen faucet. I started by removing the sink and old faucet so they could install the new counter top. Once the counter top was installed I ran a new hot water line and new cold water line from the floor and supported them against the wall with bell hangers. I then installed two stop shutoff valves for the faucet and one for the dishwasher supply. I then dropped in the sink with a bead of silicone to seal it. I then installed the basket strainer, a p-trap, and an air admittance valve to give the drain proper ventilation. I then installed the dishwasher by connecting it to the wye tailpipe in the sink drain, hooking up to the supply with a braided line, and using the clips to secure it under the cou
